How low can you go.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72gmcshorty · 01-18-2005, 12:58 PM

On a 72, how low can you get the front with dropped spindles, and lowered coils before you have any clearance problems? Does anyone have any pics?

Tx Firefighter · 01-18-2005, 01:41 PM

I have 3 inch spindles and 2 inch coils in the front of my Blazer. It's plenty low to where you have to be real concerned about whacking the lower a-arms into stuff. The solution is the extensive crossmember mods these guys are doing nowdays.

01-18-2005, 12:58 PM	#1
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	How low can you go.... On a 72, how low can you get the front with dropped spindles, and lowered coils before you have any clearance problems? Does anyone have any pics? __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

01-18-2005, 01:41 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	I have 3 inch spindles and 2 inch coils in the front of my Blazer. It's plenty low to where you have to be real concerned about whacking the lower a-arms into stuff. The solution is the extensive crossmember mods these guys are doing nowdays. __________________ I'm on the Instagram- @Gearhead_Kevin

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.