FS- 1969 Chevy C-10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slick69Green · 01-22-2005, 02:51 AM

'69 c-10 longbed

454
Longtubes w/ 2ch flows
TH-350
2500 Stall, though you don't need to rev to 2500 to get it going...
Stock gearing (if memory serves, 3.73's)
Some autometer guages
Electric fan setup (needs relay and temp probe, currenty on a toggle switch)
That is about it.

There is rust on it. The interior, just above the windshield is rusted, cheap replacement available through LMC. Some rust spots here and there. Needs a new gas tank. Sending unit is not reading. Inner fenders need help, as well as just below the doors. But what do you expect, it is OLD.

It also needs a new speedo cable, damn LT's melted the old one off.

Best ET was 13.6.

The exhaust is complete to the back of the truck, it is not dumped anymore (unlike how it is shown in the pics)

Here are some pics, they are a bit old...I'll get some more this weekend.

If you know of ANYONE who may want this truck, please direct them my way. I NEED THIS GONE!

Paid 2K for it, asking 1500, o.b.o.

I either sell this, or donate it to charity. I'd hate to see it go to a charity, I'd rather see it go to somebody who likes these trucks as much as I do. I've decided to chase after my mustang than the pickup.

I'm in Houston, TX. Local offers are more ideal.

slick69green@yahoo.com for all questions! Thanks!!

silvertonguedevil · 01-22-2005, 03:41 AM

By looking at the pictures....I would say that it looks like you're about to fry the tires off.

Is this pretty accurate?

Slick69Green · 01-22-2005, 06:47 AM

Quote:

Originally Posted by silvertonguedevil

By looking at the pictures....I would say that it looks like you're about to fry the tires off.

Is this pretty accurate?

well, that was my friend. he wanted to ditch those o/r tires, so he burned them down.

I baught it from him.

This was almost a year ago, and those pics are from the year before.

CHEVYE · 01-22-2005, 09:04 AM

dang, $1500 with a big block sounds like a pretty good deal, any pics of the engine?

Slick69Green · 01-22-2005, 09:13 AM

nope, I'll be getting some more pics this weekend. I'll update this either sunday night or monday morning.

CHEVYE · 01-22-2005, 09:45 AM

too bad you weren`t closer. i`d really like to check the truck out, seems like they`re a dime a dozen in TX.

silvertonguedevil · 01-22-2005, 12:00 PM

Pretty solid looking truck. Doesn't look like much rust.

Slick69Green · 01-24-2005, 12:51 PM

Quote:

Originally Posted by silvertonguedevil

Pretty solid looking truck. Doesn't look like much rust.

There is some there. The interior rust just above the windshield really wasn't as bad as I thought. Anywhere from slight to about 1.5 inch line exists. The most of it is just above the passenger visor.

I have some engine/interior pics, but they are on my friends camera. I am waiting for him to send them to me, once he does, I'll post it up here for all of you to see.

roj2323 · 01-24-2005, 01:02 PM

i have 1500 cash if you can get it to chicago.

Slick69Green · 01-24-2005, 08:11 PM

Quote:

Originally Posted by roj2323

i have 1500 cash if you can get it to chicago.

I couldn't imagine the shipping costs.

ChrisK10 · 01-25-2005, 01:08 AM

That's a nice price on a truck like that! Good luck, it should sell quickly.

skahide · 01-25-2005, 06:44 PM

IM VERY INTERESTED!!! as soon as you get some pics can you send them to skahide@hotmail.com

Striker169 · 01-25-2005, 09:00 PM

I am located in Austin, could you send some engine pics my way and those pics, striker169(AT)gmail.com I would like to buy it monday if possible

dinnut · 01-25-2005, 10:47 PM

sorry to be off topic but does the exhaust sound any better going all the way back than being dumped off right after the mufflers

Slick69Green · 01-26-2005, 01:13 PM

Quote:

Originally Posted by dinnut

sorry to be off topic but does the exhaust sound any better going all the way back than being dumped off right after the mufflers

It does sound mean. When my friend added the exhaust, it quieted the cab down a lot, but it is still loud as all get out.

Slick69Green · 01-26-2005, 01:14 PM

here is the link to the engine pics

http://www.fordpower.net/forums/showthread.php?t=114501

I have the same pics here, but one of my friends used his camera, and got shots of the interior and motor.

CHEVYE · 01-26-2005, 01:43 PM

ford forum ha

what did you post that as a "ford stomper" or what?

man i sure wish you were closer

i hope someone is smart enough to snag this up quick.

01-22-2005, 02:51 AM	#1
Slick69Green Registered User Join Date: Aug 2004 Location: Texas Posts: 10	FS- 1969 Chevy C-10 '69 c-10 longbed 454 Longtubes w/ 2ch flows TH-350 2500 Stall, though you don't need to rev to 2500 to get it going... Stock gearing (if memory serves, 3.73's) Some autometer guages Electric fan setup (needs relay and temp probe, currenty on a toggle switch) That is about it. There is rust on it. The interior, just above the windshield is rusted, cheap replacement available through LMC. Some rust spots here and there. Needs a new gas tank. Sending unit is not reading. Inner fenders need help, as well as just below the doors. But what do you expect, it is OLD. It also needs a new speedo cable, damn LT's melted the old one off. Best ET was 13.6. The exhaust is complete to the back of the truck, it is not dumped anymore (unlike how it is shown in the pics) Here are some pics, they are a bit old...I'll get some more this weekend. If you know of ANYONE who may want this truck, please direct them my way. I NEED THIS GONE! Paid 2K for it, asking 1500, o.b.o. I either sell this, or donate it to charity. I'd hate to see it go to a charity, I'd rather see it go to somebody who likes these trucks as much as I do. I've decided to chase after my mustang than the pickup. I'm in Houston, TX. Local offers are more ideal. slick69green@yahoo.com for all questions! Thanks!! __________________ 1969 Chevy C-10 Longbed 454 powered w/ TH-350 (can't wait for it to blow up) Best truck I've ever owned Last edited by Slick69Green; 01-24-2005 at 12:53 PM.

01-22-2005, 03:41 AM	#2
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	By looking at the pictures....I would say that it looks like you're about to fry the tires off. Is this pretty accurate? __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

01-22-2005, 09:04 AM	#4
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	dang, $1500 with a big block sounds like a pretty good deal, any pics of the engine? __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-22-2005, 09:13 AM	#5
Slick69Green Registered User Join Date: Aug 2004 Location: Texas Posts: 10	nope, I'll be getting some more pics this weekend. I'll update this either sunday night or monday morning. __________________ 1969 Chevy C-10 Longbed 454 powered w/ TH-350 (can't wait for it to blow up) Best truck I've ever owned

01-22-2005, 09:45 AM	#6
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	too bad you weren`t closer. i`d really like to check the truck out, seems like they`re a dime a dozen in TX. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-22-2005, 12:00 PM	#7
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	Pretty solid looking truck. Doesn't look like much rust. __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

01-24-2005, 01:02 PM	#9
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	i have 1500 cash if you can get it to chicago.

01-25-2005, 01:08 AM	#11
ChrisK10 1971 C20 Custom Camper Join Date: Mar 2003 Location: Ames/Shenandoah, IA Posts: 1,435	That's a nice price on a truck like that! Good luck, it should sell quickly. __________________ '71 Chevy C20 Custom Camper, 454, TH400 '97 GMC K1500 5.7L

01-25-2005, 06:44 PM	#12
skahide Looking @ 67 Chevy Short Step Join Date: Jul 2004 Location: Near Tyler, Texas Posts: 136	IM VERY INTERESTED!!! as soon as you get some pics can you send them to skahide@hotmail.com

01-25-2005, 09:00 PM	#13
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	I am located in Austin, could you send some engine pics my way and those pics, striker169(AT)gmail.com I would like to buy it monday if possible Last edited by Striker169; 01-26-2005 at 12:52 AM.

01-25-2005, 10:47 PM	#14
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	sorry to be off topic but does the exhaust sound any better going all the way back than being dumped off right after the mufflers __________________ 70 longbed 496/th400/Ford 9"

01-26-2005, 01:14 PM	#16
Slick69Green Registered User Join Date: Aug 2004 Location: Texas Posts: 10	here is the link to the engine pics http://www.fordpower.net/forums/showthread.php?t=114501 I have the same pics here, but one of my friends used his camera, and got shots of the interior and motor. __________________ 1969 Chevy C-10 Longbed 454 powered w/ TH-350 (can't wait for it to blow up) Best truck I've ever owned

01-26-2005, 01:43 PM	#17
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	ford forum ha what did you post that as a "ford stomper" or what? man i sure wish you were closer i hope someone is smart enough to snag this up quick. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.