Free: 2 engines, SM420 (2wd), TH400 (2wd), 400 SB heads - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scootergmc · 01-30-2005, 04:47 PM

SOLD GONE GIVEN AWAY!! Engine 1: 350 long block complete pan to manifold. Pulled from decent runner. I think 2 bolt.

Engine 2: 350 short block 30 over. Has water down a hole=pitting and rust. Good for anchor or machine class.

SM465 2wd: Pulled from '66 GMC 1T. Shift into all gears, never drove it. Covered in years of goo. Has some rust on the shaft.

TH400 2wd: Pulled from Strong running '71. Been sitting ever since.

SB 400 heads complete: Came off a non runner. But hey the price is right.

Come get it all (please take it all) for free or whatever you want to give me. All stuff has been stored indoors (not saying it's clean by any means). Roof leak led to the water in the hold incident. I'm located in Galt, CA. The engines are currently at a friend's house in Thornton. He has a hoist and forklift to put them into the back of your truck/car/motorcycle/whatever. They will be moved to my house should anyone not come pick them up today. Oh yeah, I have a bellhousing too. THIS STUFF IS GONE

LUV2XCLR8 · 01-30-2005, 04:53 PM

WOW, WISH YOU WERE CLOSER, I'D SNATCH THAT TH400 TRANNY.

bigbluthng · 01-30-2005, 05:00 PM

dibs on the tranny if it is remotely close to me. where is galt, ca?

bigbluthng · 01-30-2005, 05:03 PM

just looked it up onling and it's way north m=of me. why are all the darn good deals in northern cali? makes me want to make a trip up there with a trailer!

LUV2XCLR8 · 01-30-2005, 05:09 PM

Quote:

Originally Posted by bigbluthng

just looked it up onling and it's way north m=of me. why are all the darn good deals in northern cali? makes me want to make a trip up there with a trailer!

YOU CALI GUYS KILL ME, WE DRIVE 3 STATES AWAY FOR STUFF, & YOU
GUYS COMPLAIN IF IT'S ON THE OTHER END OF THE STATE FROM YA

67ChevyC10Stepside · 01-30-2005, 05:11 PM

wow man...lot of money there in free stuff.

scootergmc · 01-30-2005, 05:17 PM

Yes there is. But I got rid of the last of my trucks a couple years ago. I will build again when the daughter is old enough to drive. It will teach her the value of a $.

Edited to reflect SM465 and not SM420.

scootergmc · 01-30-2005, 05:20 PM

Quote:

Originally Posted by bigbluthng

just looked it up onling and it's way north m=of me. why are all the darn good deals in northern cali? makes me want to make a trip up there with a trailer!

White trash.

GenIIIShorty · 01-30-2005, 05:52 PM

maybe so luv, but when you drive three states away, it's closer than driving one end of cali to another!

LUV2XCLR8 · 01-30-2005, 05:55 PM

Quote:

Originally Posted by GenIIIShorty

maybe so luv, but when you drive three states away, it's closer than driving one end of cali to another!

MAYBE THAT'S TRUE, BUT CALI END TO END IS A PRETTY DRIVE

scootergmc · 01-30-2005, 06:11 PM

Gone!!!! Sold!!!! Freed!!!

bigbluthng · 01-30-2005, 11:19 PM

Quote:

Originally Posted by LUV2XCLR8

MAYBE THAT'S TRUE, BUT CALI END TO END IS A PRETTY DRIVE

i took that drive back in september when another member sold me a 70 swb fleet rolling for $300. if i can find a 454, blazer buckets and any other goodies up there i might just make another run.

kennyw · 01-31-2005, 09:58 PM

Quote:

Originally Posted by LUV2XCLR8

YOU CALI GUYS KILL ME, WE DRIVE 3 STATES AWAY FOR STUFF, & YOU
GUYS COMPLAIN IF IT'S ON THE OTHER END OF THE STATE FROM YA

Yes, but California is 3 or 4 states tall too (compare it to WA and OR in overall height). Something like 700-800 miles from south end to north end where WA and Oregon are around 250 miles from south to north.

RED67 · 02-01-2005, 08:56 AM

almost as long if you were to drive across the big state if TEXAS.....

01-30-2005, 04:47 PM	#1
scootergmc Registered User Join Date: Aug 2003 Location: Galt, CA Posts: 16	GONE: 2 engines, SM465 (2wd), TH400 (2wd), 400 SB heads SOLD GONE GIVEN AWAY!! Engine 1: 350 long block complete pan to manifold. Pulled from decent runner. I think 2 bolt. Engine 2: 350 short block 30 over. Has water down a hole=pitting and rust. Good for anchor or machine class. SM465 2wd: Pulled from '66 GMC 1T. Shift into all gears, never drove it. Covered in years of goo. Has some rust on the shaft. TH400 2wd: Pulled from Strong running '71. Been sitting ever since. SB 400 heads complete: Came off a non runner. But hey the price is right. Come get it all (please take it all) for free or whatever you want to give me. All stuff has been stored indoors (not saying it's clean by any means). Roof leak led to the water in the hold incident. I'm located in Galt, CA. The engines are currently at a friend's house in Thornton. He has a hoist and forklift to put them into the back of your truck/car/motorcycle/whatever. They will be moved to my house should anyone not come pick them up today. Oh yeah, I have a bellhousing too. THIS STUFF IS GONE Last edited by scootergmc; 01-30-2005 at 06:14 PM. Reason: edit

01-30-2005, 04:53 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	WOW, WISH YOU WERE CLOSER, I'D SNATCH THAT TH400 TRANNY. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-30-2005, 05:00 PM	#3
bigbluthng Registered User Join Date: Aug 2003 Location: canyon country, ca, USA Posts: 336	dibs on the tranny if it is remotely close to me. where is galt, ca? __________________

01-30-2005, 05:03 PM	#4
bigbluthng Registered User Join Date: Aug 2003 Location: canyon country, ca, USA Posts: 336	just looked it up onling and it's way north m=of me. why are all the darn good deals in northern cali? makes me want to make a trip up there with a trailer! __________________

01-30-2005, 05:11 PM	#6
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	wow man...lot of money there in free stuff. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

01-30-2005, 05:17 PM	#7
scootergmc Registered User Join Date: Aug 2003 Location: Galt, CA Posts: 16	Yes there is. But I got rid of the last of my trucks a couple years ago. I will build again when the daughter is old enough to drive. It will teach her the value of a $. Edited to reflect SM465 and not SM420.

01-30-2005, 05:52 PM	#9
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	maybe so luv, but when you drive three states away, it's closer than driving one end of cali to another! __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

01-30-2005, 06:11 PM	#11
scootergmc Registered User Join Date: Aug 2003 Location: Galt, CA Posts: 16	Gone!!!! Sold!!!! Freed!!!

02-01-2005, 08:56 AM	#14
RED67 Forever Grateful Join Date: Mar 2001 Location: Forney,Texas Posts: 777	almost as long if you were to drive across the big state if TEXAS..... __________________ R.I.P Dad 04-07-42 - 05-27-09

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.