|
07-13-2002, 09:38 PM
|
#1 |
|
Registered User
Join Date: Apr 2002
Location: Center Point, IA
Posts: 502
|
Hood problem
72 C10
I took off the hood and the hinges. Painted them. Hood won't come down to be flush with the fenders at the back. Oiled the snot out of the springs/hinges. What's the secret? Got a fat neighbor who's willing to ride on the back of the hood, but don't think the offer will last long.  Thanks |
|
|
|
07-13-2002, 09:42 PM
|
#2 |
|
yes i did post something
Join Date: Jun 2002
Posts: 244
|
i hav the exact same problem with mine if u figure it out please let me know!!!
|
|
|
|
|
07-14-2002, 12:24 AM
|
#3 |
|
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,856
|
Weak and worn out hood hinges causes this. I just helped my dad replace his and this problem was solved!
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
|
|
|
|
07-14-2002, 12:27 AM
|
#4 | |
|
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,283
|
also not having the hinges adjusted right will do that, loosen the bolts to the fenders with the hood lifted, and push up on the front of the hood, keep adjusting it up and down liek that untill you get it right.. i just did mine tonight, took me an hour to get it to line up right
__________________
ASE Master Certified-GM Trained-Mechanic 1968 Chevy C30 157" WB Wrecker 1969 Chevy CST/10 SWB 1971 Chevy Custom/10 (first truck) 350, NV3500 5 speed 1971 Chevy K20 Custom Camper 4x4 350 TBI, SM465/NP205 1974 Chevy Custom Deluxe/10 1979 Chevy Custom Deluxe K10 farm truck beater 1989 Chevy K2500 Quote:
|
|
|
|
|
|
07-14-2002, 09:03 AM
|
#5 |
|
Registered User
Join Date: Feb 2002
Location: Gilmer, Texas USA
Posts: 313
|
Blue_71 is right if it was ok before you removed it, it should go back. You just have to work with it. If your hindges were worn before no amount of adjusting will get it all out. Good luck.
__________________
69 Chevy short fleet side soon to have LT1 and 4L60E pb. ps cruise and air. 68 Chevy short fleet side 400 sb 5 inch chop top pb. ps. pw. 350 auto and shaved handles 68 anniversary no engine long wheel base 400 auto FOR SALE 68 Chevy fleet side long wheel base complete parts truck. |
|
|
|
|
07-15-2002, 10:01 PM
|
#6 |
|
Registered User
Join Date: Apr 2002
Location: Center Point, IA
Posts: 502
|
Chevyman68/10 and Blue...71 were exactly right. Do what they said. The only thing I would add is, loosen up the 3 bolts on each side that hold the springs to the fenders. Don't take them out. Then squirt some oil in there. Have a beer and invite a neighbor over to hold up the hood. Works great! (the beer AND the adjustment procedure) The back and forth adjustment is done with the bolts that hold the hood onto the springs.
Thanks, guys. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
