What I need......... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

8door · 02-17-2005, 11:36 PM

To get it on the road ( to paint)
Need 1. Steering shaft coupler ( rag joint) 13/16" for power steering box
2. Kick down bracket and switch for quadjet th400 trans.
3. Choke thermostate coil that mounts on top of manifold.(Hope this is correct description )
4. Shift pointer 67 68 only (I have a later one but stands up too high.
I'll trade it includes the attached fiber optic)
5. Center link.
My truck is a 68 C10 changed to 69 power steering box.
Chris

**tnblazerk5** · 02-17-2005, 11:39 PM

Steering shaft coupler ( rag joint) 13/16" for power steering box
do ya have a napa near ya they got those or they did here about 2 years ago anyway

8door · 02-17-2005, 11:41 PM

Yep got a Napa ,thought maybe cheaper used but know that I think about I should spring for $50 for a new on.

8door · 02-17-2005, 11:42 PM

Thats NEW ONE! I can't type and chew gum at same time

**tnblazerk5** · 02-18-2005, 12:14 AM

$50 bucks holy **** i think they were like 15 or 20 when i got the one i needed

8door · 02-18-2005, 02:22 AM

I'll let you know, I was going by a local CarQuest shop wanted $40 just for the rubber and new bolts not the calmp part.

MOTHERTRUCKERS · 02-18-2005, 09:37 AM

damn i'll sell you 2 new ones with bolts and shipping for that price.

8door · 02-18-2005, 01:28 PM

Mothertrucker. So they are $20 each? I'll buy one.
Chris

02-17-2005, 11:36 PM	#1
8door Not too old to learn Join Date: Mar 2004 Location: SoCal Posts: 617	What I need......... To get it on the road ( to paint) Need 1. Steering shaft coupler ( rag joint) 13/16" for power steering box 2. Kick down bracket and switch for quadjet th400 trans. 3. Choke thermostate coil that mounts on top of manifold.(Hope this is correct description ) 4. Shift pointer 67 68 only (I have a later one but stands up too high. I'll trade it includes the attached fiber optic) 5. Center link. My truck is a 68 C10 changed to 69 power steering box. Chris __________________ 1968 C10 a way to long restoration.

02-17-2005, 11:41 PM	#3
8door Not too old to learn Join Date: Mar 2004 Location: SoCal Posts: 617	Yep got a Napa ,thought maybe cheaper used but know that I think about I should spring for $50 for a new on. __________________ 1968 C10 a way to long restoration.

02-17-2005, 11:42 PM	#4
8door Not too old to learn Join Date: Mar 2004 Location: SoCal Posts: 617	Thats NEW ONE! I can't type and chew gum at same time __________________ 1968 C10 a way to long restoration.

02-18-2005, 02:22 AM	#6
8door Not too old to learn Join Date: Mar 2004 Location: SoCal Posts: 617	I'll let you know, I was going by a local CarQuest shop wanted $40 just for the rubber and new bolts not the calmp part. __________________ 1968 C10 a way to long restoration.

02-18-2005, 09:37 AM	#7
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	damn i'll sell you 2 new ones with bolts and shipping for that price. __________________ Rest in Peace Ed. Thanks for all the good times.

02-17-2005, 11:39 PM	#2
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	Steering shaft coupler ( rag joint) 13/16" for power steering box do ya have a napa near ya they got those or they did here about 2 years ago anyway

02-18-2005, 12:14 AM	#5
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	$50 bucks holy **** i think they were like 15 or 20 when i got the one i needed

02-18-2005, 01:28 PM	#8
8door Not too old to learn Join Date: Mar 2004 Location: SoCal Posts: 617	Mothertrucker. So they are $20 each? I'll buy one. Chris __________________ 1968 C10 a way to long restoration.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.