58-59 Chevy Shortbed Fleetside bed trim FS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NAPCO ken · 02-11-2004, 08:56 PM

Bedside trim for a 58-59 Chev short fleet, complete package $600 (I know, OUCH, but this stuff is rarer than hen's teeth!!).

dubie · 02-13-2004, 12:15 PM

I was actually interested in finding some after seeing a 58 fleetside witht he chrome trim featured in a Classic Trucks mag, but at that cost, I think I'll just paint the bed and forget about the trim. I agree its rare and it sure does make a truck look that much beter. I just can't afford to buy it. Did you buy them as reproduction or are they original? I have never seen them for sale before

NAPCO ken · 02-13-2004, 03:37 PM

They are originals. I do not believe they make reproductions of this stuff...probably not that much demand for them.

jill56 · 02-18-2004, 08:18 PM

do you have any pics of the trim?

NAPCO ken · 02-18-2004, 08:26 PM

no, but I will take some in the next day or two.

rico_bob · 02-18-2004, 10:05 PM

Jill,
How are you doing? rico (Richard)

jill56 · 02-19-2004, 10:58 PM

Great :- )

I sent you a couple of pics, but I don't know if you got them. LOL
Let me know if you didn't. Here is one. My dad made the leaf springs work from the camaro. He did a really good job. We notched the frame so it would have plenty of travel.

jill56 · 02-19-2004, 11:04 PM

Pic

rotadyne · 03-18-2004, 01:21 PM

Send me some pics of that trim too.

Thanks
Dave

NAPCO ken · 03-22-2004, 04:06 PM

the trim has been sold. thanks.

72datsun · 02-18-2005, 10:52 PM

very interested , is it still available?
Brad

02-11-2004, 08:56 PM	#1
NAPCO ken Registered User Join Date: Aug 2001 Location: anaheim, ca Posts: 187	58-59 Chevy Shortbed Fleetside bed trim FS Bedside trim for a 58-59 Chev short fleet, complete package $600 (I know, OUCH, but this stuff is rarer than hen's teeth!!). __________________ ken '58 Chev NAPCO 4x4 short '60 GMC Suburban 4x4, restored '60 GMC 3/4T stepside 4x4 '64 GMC Suburban 4x4, restored '90 Chev Suburban 4x4, dually, ZZ502 '77 GMC Suburban 4x4, one ton axles, 12" lift, 39.5"s '88 Chevy crewcab dually 4x4, 10" lift, 42"s (x6!) '03 Jeep Wrangler Rubicon '79 Chev 3/4 Suburban 4x4, 400-400-203

02-13-2004, 12:15 PM	#2
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	I was actually interested in finding some after seeing a 58 fleetside witht he chrome trim featured in a Classic Trucks mag, but at that cost, I think I'll just paint the bed and forget about the trim. I agree its rare and it sure does make a truck look that much beter. I just can't afford to buy it. Did you buy them as reproduction or are they original? I have never seen them for sale before __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

02-13-2004, 03:37 PM	#3
NAPCO ken Registered User Join Date: Aug 2001 Location: anaheim, ca Posts: 187	They are originals. I do not believe they make reproductions of this stuff...probably not that much demand for them. __________________ ken '58 Chev NAPCO 4x4 short '60 GMC Suburban 4x4, restored '60 GMC 3/4T stepside 4x4 '64 GMC Suburban 4x4, restored '90 Chev Suburban 4x4, dually, ZZ502 '77 GMC Suburban 4x4, one ton axles, 12" lift, 39.5"s '88 Chevy crewcab dually 4x4, 10" lift, 42"s (x6!) '03 Jeep Wrangler Rubicon '79 Chev 3/4 Suburban 4x4, 400-400-203

02-18-2004, 08:18 PM	#4
jill56 Registered User Join Date: Feb 2003 Location: Bassett, Va. Posts: 59	trim do you have any pics of the trim?

02-18-2004, 08:26 PM	#5
NAPCO ken Registered User Join Date: Aug 2001 Location: anaheim, ca Posts: 187	no, but I will take some in the next day or two. __________________ ken '58 Chev NAPCO 4x4 short '60 GMC Suburban 4x4, restored '60 GMC 3/4T stepside 4x4 '64 GMC Suburban 4x4, restored '90 Chev Suburban 4x4, dually, ZZ502 '77 GMC Suburban 4x4, one ton axles, 12" lift, 39.5"s '88 Chevy crewcab dually 4x4, 10" lift, 42"s (x6!) '03 Jeep Wrangler Rubicon '79 Chev 3/4 Suburban 4x4, 400-400-203

02-18-2004, 10:05 PM	#6
rico_bob "Treasure the Ride" Join Date: Nov 2001 Location: Mid Michigan, Harrison Michigan, USA Posts: 682	Jill, How are you doing? rico (Richard) __________________ If you think you can you're right. If you think you can't you're still right. Trucks: '56 SWB; '57 SWB; '63 C-10 Current projects: 1963 Long Fleetside for the wife! '56 for the daughter. Visit us at: www.ricos-rods-and-relics.com

02-19-2004, 10:58 PM	#7
jill56 Registered User Join Date: Feb 2003 Location: Bassett, Va. Posts: 59	truck Great :- ) I sent you a couple of pics, but I don't know if you got them. LOL Let me know if you didn't. Here is one. My dad made the leaf springs work from the camaro. He did a really good job. We notched the frame so it would have plenty of travel.

02-19-2004, 11:04 PM	#8
jill56 Registered User Join Date: Feb 2003 Location: Bassett, Va. Posts: 59	truck Pic Attached Images

03-18-2004, 01:21 PM	#9
rotadyne Registered User Join Date: Jul 2002 Location: Laporte, In Posts: 33	bed trim Send me some pics of that trim too. Thanks Dave

03-22-2004, 04:06 PM	#10
NAPCO ken Registered User Join Date: Aug 2001 Location: anaheim, ca Posts: 187	the trim has been sold. thanks. __________________ ken '58 Chev NAPCO 4x4 short '60 GMC Suburban 4x4, restored '60 GMC 3/4T stepside 4x4 '64 GMC Suburban 4x4, restored '90 Chev Suburban 4x4, dually, ZZ502 '77 GMC Suburban 4x4, one ton axles, 12" lift, 39.5"s '88 Chevy crewcab dually 4x4, 10" lift, 42"s (x6!) '03 Jeep Wrangler Rubicon '79 Chev 3/4 Suburban 4x4, 400-400-203

02-18-2005, 10:52 PM	#11
72datsun Registered User Join Date: Feb 2005 Posts: 1	very interested , is it still available? Brad

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.