info on 80 somthing 3/4ton frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BurnoutNova · 02-20-2005, 12:06 AM

i have a friend who has a late 70's early 80's 3/4 ton Long frame and axles he wants to sell.

it has a 10 bolt, and 14 bolt with disc brakes in the front. he thought it could be a 1 ton, but im sure its a 3/4 with the front axle being a corporate 10 bolt. the springs in the back look heavy duty but the fronts look like 1/3 ton springs. the gears are 4.10's

it has the same style lockouts my 71 half ton has, except there red and say spicer in the middle.

any idea's on what it would be worth???

**JIMs70GMC** · 02-20-2005, 06:09 AM

in my area the axles would fetch about $300-400 a pair. what else does the frame come with? steering? engine? tranny? transfer case? driveshafts?

BurnoutNova · 02-20-2005, 04:43 PM

its a frame, steering box and linkage, wheels and tires, axles, brakes, shocks and springs... thats it.

is there anywhere i can look for the year on the frame?

02-20-2005, 12:06 AM	#1
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	info on 80 somthing 3/4ton frame i have a friend who has a late 70's early 80's 3/4 ton Long frame and axles he wants to sell. it has a 10 bolt, and 14 bolt with disc brakes in the front. he thought it could be a 1 ton, but im sure its a 3/4 with the front axle being a corporate 10 bolt. the springs in the back look heavy duty but the fronts look like 1/3 ton springs. the gears are 4.10's it has the same style lockouts my 71 half ton has, except there red and say spicer in the middle. any idea's on what it would be worth???

02-20-2005, 06:09 AM	#2
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	in my area the axles would fetch about $300-400 a pair. what else does the frame come with? steering? engine? tranny? transfer case? driveshafts? __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-20-2005, 04:43 PM	#3
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	its a frame, steering box and linkage, wheels and tires, axles, brakes, shocks and springs... thats it. is there anywhere i can look for the year on the frame?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.