how does the ignition bezel come off - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bigunde** · 03-04-2005, 07:20 PM

im changing out my ignition switch and unscrewed the bezel and the key part seems to be holding it.help!!!

cdowns · 03-04-2005, 07:29 PM

you have to remove the key cylinder by using a paperclip in the hole above key with the key in turn key and push paperclip and the cylinder will come out eventually

Longhorn Man · 03-04-2005, 07:42 PM

turn the switch counter clockwise as cdowns described....towards the ACC position...wiggle and cuss.. it'll come out

03-04-2005, 07:20 PM	#1
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	how does the ignition bezel come off im changing out my ignition switch and unscrewed the bezel and the key part seems to be holding it.help!!!

03-04-2005, 07:29 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	you have to remove the key cylinder by using a paperclip in the hole above key with the key in turn key and push paperclip and the cylinder will come out eventually __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-04-2005, 07:42 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	turn the switch counter clockwise as cdowns described....towards the ACC position...wiggle and cuss.. it'll come out



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.