![]() |
![]() |
#1 |
Registered User
Join Date: May 2004
Location: Oklahoma City
Posts: 205
|
Spring question
I just brought home a '72 for parts. It has the all the parts that I need to swap my 69 to 5 lug and power disc brakes. I noticed that this truck is slightly lower than mine and I was wondering how to identify stock springs from drop springs. If it does turn out that these are drop springs I would like to trade them for stocks if anyone is interested.
__________________
1969 chevy C10 long bed 350 4bbl auto p/disc and 5 lug |
![]() |
![]() |
![]() |
#2 |
Still drivin' a Rat Rod
Join Date: Sep 2004
Location: Monett Missouri
Posts: 4,925
|
There is a similar thread going on right here.
http://67-72chevytrucks.com/vboard/s....php3?t=139272 HTH
__________________
Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the *a$#* 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2004
Location: Oklahoma City
Posts: 205
|
I guess I should have stated that I have coil springs. Thanks for the quick reply Brainchild.
__________________
1969 chevy C10 long bed 350 4bbl auto p/disc and 5 lug |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2004
Location: Oklahoma City
Posts: 205
|
ttt
__________________
1969 chevy C10 long bed 350 4bbl auto p/disc and 5 lug |
![]() |
![]() |
![]() |
#5 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Use the original springs on the 69...sell the 72's springs as one inch lowering springs.
They do settle down over the years, my old GMC had 500 K, and everyone swore the front end had been dropped, but all that had been done up front was the original sagging springs were left in place. |
![]() |
![]() |
![]() |
#6 |
Account Suspended
Join Date: Mar 2001
Location: Virginia Beach, Va. U.S.A.
Posts: 15,320
|
If they are dropped springs, they are most likely really clean and black like they were painted recently. I have a pair of stock ones that I'll ship to your front door for $50 if you're interested.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: May 2004
Location: Oklahoma City
Posts: 205
|
Thanks for the responses guys. I am just being lazy I guess. I can do the back ones easily but the fronts I have to pull apart on both crossmembers. Is there a safe way to pull them apart with a spring compressor?
__________________
1969 chevy C10 long bed 350 4bbl auto p/disc and 5 lug |
![]() |
![]() |
![]() |
#8 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
you don't need a spring compressor. They are more for struts than A arm suspentions. Just place a floor jack under the lower a arm, seperate the ball joint, and lower the jack. the spring will just fall out. If you don't feel safe, then run a cahin through it and around the frame or something.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|