tach reads 2850 at 65mph - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vfrdude · 03-10-2005, 12:12 PM

The calculators seem to be pretty close in my case. It shows right about 2100 RPM at 65 with 3.73 gearing.

Albertan · 03-10-2005, 02:45 PM

Thanks guy's (or gal's) for all the info. This gives me something to work with.

I don't think I want to put the stall converter in for towing. Any one need a stall converter? Just kidding, I cannot sell it, because I don't know if it is good and I don't what to rip anyone off.

Thanks again guy's (or gal's)!

03-10-2005, 12:12 PM	#26
vfrdude Registered User Join Date: May 2002 Location: Oakley, Ca. USA Posts: 137	The calculators seem to be pretty close in my case. It shows right about 2100 RPM at 65 with 3.73 gearing. __________________ Rudy Fierros '95 Honda VFR750F Used to have a '71 Chevy Stepside, Guards Red, Lowered 4" rear, 3" front, White Oak bed wood, 700R4 w/373 gears until some low life stole it!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-10-2005, 02:45 PM	#27
Albertan Registered User Join Date: Mar 2005 Location: East of Calgary, Alberta Posts: 20	Thanks guy's (or gal's) for all the info. This gives me something to work with. I don't think I want to put the stall converter in for towing. Any one need a stall converter? Just kidding, I cannot sell it, because I don't know if it is good and I don't what to rip anyone off. Thanks again guy's (or gal's)!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.