14 bolt disc conversion brackets on Eaton ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RainFade · 03-15-2005, 07:51 PM

I saw a few posts on pirate4x4 that this is doable and was wondering if anyone here had done it.
Better yet if anyone has done this could I get some feedback on how it went and a few pictures if you have them?

Thanks In Advance.

Rod · 03-17-2005, 09:08 AM

http://members.aol.com/blackbirdstrucks/index7.html

There is a site to get the brackets and such.

03-15-2005, 07:51 PM	#1
RainFade Registered User Join Date: Nov 2004 Location: Central Ohio Posts: 215	14 bolt disc conversion brackets on Eaton ? I saw a few posts on pirate4x4 that this is doable and was wondering if anyone here had done it. Better yet if anyone has done this could I get some feedback on how it went and a few pictures if you have them? Thanks In Advance. __________________ 71 K20 350/350/205, dealer air, 4" lift, Flowtech,Edel 1406 on 2101, procomp HEI,4.10's, 33x12.50x16.5 BFG MT's on slots. 4 wheel disc brakes. My lame K20 page My lame Eaton disc brake page

03-17-2005, 09:08 AM	#2
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	http://members.aol.com/blackbirdstrucks/index7.html There is a site to get the brackets and such. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.