![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2002
Location: Blackwood, NJ
Posts: 27
|
Clutch question
Looks like the "new" 67 needs a clutch, its slipping pretty bad. I looked online to order one and they give the option of 10", 11" and 12" Without tearing this down and measuring is there any way to tell what size clutch disk I should have? It is a 67 with a straight 6 and 3 on the column. Dont have many other details yet.
|
![]() |
![]() |
![]() |
#2 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,403
|
My guess would be a 10" clutch on the 6 cyl /3 spd........but I wouldnt order on a guess! if you pull the inspec cover on the bottom of the bell, the smaller set up will have approx 1" from the edge of the press plate to the edge of the fly wheel. the 11 & 12" setups will both bolt to the same flywheel,& will have the bolts about all the way out to the edge of the flywheel. good luck....Al
|
![]() |
![]() |
![]() |
#3 | |
Registered User
Join Date: Jul 2002
Location: Blackwood, NJ
Posts: 27
|
Quote:
![]() |
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2001
Location: Killingworth, CT. USA
Posts: 3,378
|
![]()
You may want to have the flywheel resurfaced and also check the ring gear for damage, this can be flipped or replaced easily at this time.
__________________
1971 C10 swb stepside 350/700R4/3.73posi (retired as of 4/22/03) 1998 S10 short bed 2002 S10 Blazer 1942 Oldsmobile 1958 Massey Harris Pony 1951 Wife Killingworth, Connecticut May those who love us, love us, any of those who do not love us, may God turn their hearts. And if God is unable to turn their hearts, may he turn their ankles so we may know them by their limping. A man who works with his hands is a laborer; a man who works with his hands and his brain is a craftsman; but a man who works with his hands and his brain and his heart is an artist. |
![]() |
![]() |
![]() |
#5 |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
I just did mine 2 months ago. It was a 10" clutch.
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Dec 1999
Location: Old Mission, MI, USA
Posts: 2,510
|
Do not install a new clutch disc without having the flywheel resurfaced.
__________________
Tim |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|