![]() |
![]() |
#1 |
Senior Member
Join Date: Mar 2004
Location: Nebraska
Posts: 583
|
cab drop
on a 67-72 how far can you drop the cab without cuting frame.
simple and short thanks andrew |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2001
Location: rock island,il,usa
Posts: 5,382
|
Any way you go, you will have to cut something, but here is what I did..... I bodydropped 1 1/2" on my longhorn. The cab brackects were moved down on the frame, & the floor of the cab was opened up (rail to rail), & the center was raised up to make room for the frame rails. Up front , the frame horns were cut off, dropped the same 1 1/2" & boxed for strenght. The lip was then cut off the box, & also moved 1 1/2", & welded back on. my guess is you could go more on this type drop, but it does take a lot of room out of the cab. My truck also has a 4" chop top, so i was limited to how much "oldschool drop" (channelled) I could do on the body. I have seen guys do a 3" stock floor body drop , by slicing & boxing the frame, & this looked like a pretty slick way to go if you dont mind the welding & fab work
![]()
__________________
http://community.webshots.com/user/hotrodhorn |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|