FS:Some brackets and lots of Pulleys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mkmiller1 · 04-06-2005, 08:00 PM

Here are my collection of pulleys I'm going to get rid of, Price is $10 each delivered for any of these and $20 delivered on the engine brackets OR $75 delivered for everything listed on this post. I do NOT know what each of these pulleys came from, sorry. If interested please reply here along with which pulley you are interested in to keep things in order, and of course buying the whole lot takes precedent over others. Here are the descriptions for them.

Top Row-Crank pulleys(1,2,3 from left to right)
1. 3 groove 7 3/4" outer 7 1/4" inners 2 1/4" tall
2. 3 groove 7 3/4" outer 6 3/4" inners 3" tall
3. 2 piece 5 1/4" outer 6 3/4" inner

Second Row-water pump pulleys(4,5,6 from left to right)
4. single groove 7 1/8" 2" tall
5. double groove 7 1/8"(both) 2 3/4" tall
6. 3 groove 5 5/8"(all) 3 3/4" tall

Third row-water pump pulleys(7,8,9 from left to right)
7. Single groove 6 1/4" 2" tall
8. double groove 5 7/8"(both) 2 3/4" tall
9. double groove 6 1/4" outer 5 3/8" inner 2 3/4" tall

Also have 2 spacers; 1- 3" and 1- 1 1/2"

On the brackets, I know some are a/c and one is alt. not sure on all though. I'll take $20 delivered for all the brackets in the pic.

ken betz · 04-06-2005, 09:38 PM

I sent you a pm with details
Thanks
Ken

ken betz · 04-06-2005, 09:44 PM

Sorry about that, I would like #1 in the top row and all the brackets
Thanks
Ken

meathead95 · 04-07-2005, 08:18 AM

i need a correct crank pulley for a 72 350 with powersteering i just added ps to my 2wd blazer and it only has a 2 groove crank pulley and i need a 3 groove pulley if you have the correct one for my 2wd blazer please pm me with the payment details shipped to 37180
thanks
keith

mkmiller1 · 04-07-2005, 10:04 PM

Ken-PM sent

Keith-I'm not sure on which one you would need, I'm not informed at all on the pulleys and brackets, sorry. The only 3 groove I have left is #2 unsure if it would work.

ndamerau · 04-09-2005, 11:05 PM

Put me in line for the brackets. If Mr. Betz falls through, I will buy them.

meathead95 · 04-09-2005, 11:09 PM

anyone else know if this will work i have a stock 350 in a 72 2wd blazer i have added the pump and steering box all i need now is a 3 groove pulley.

mkmiller1 · 04-09-2005, 11:21 PM

ndamerau- the brackets are yours if you want them just shoot me a PM and we'll work out the details.
Matthew

ndamerau · 04-09-2005, 11:27 PM

I am not set up to PM. I will send you an e-mail that you may reply to. Thanks.

ndamerau · 04-11-2005, 11:52 PM

Still want the brackets, waiting for you to tell me where to send the money order. I am set up for PMs now, also.

Thanks.

04-06-2005, 09:44 PM	#3
ken betz AKA willie127 Join Date: Jul 2004 Location: Lake City, GA Posts: 72	Pulley and brackets Sorry about that, I would like #1 in the top row and all the brackets Thanks Ken

04-07-2005, 08:18 AM	#4
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	i need a correct crank pulley for a 72 350 with powersteering i just added ps to my 2wd blazer and it only has a 2 groove crank pulley and i need a 3 groove pulley if you have the correct one for my 2wd blazer please pm me with the payment details shipped to 37180 thanks keith __________________ 72 2wd blazer 72 swb 4x4

04-07-2005, 10:04 PM	#5
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	Ken-PM sent Keith-I'm not sure on which one you would need, I'm not informed at all on the pulleys and brackets, sorry. The only 3 groove I have left is #2 unsure if it would work. __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

04-09-2005, 11:09 PM	#7
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	anyone else know if this will work i have a stock 350 in a 72 2wd blazer i have added the pump and steering box all i need now is a 3 groove pulley. __________________ 72 2wd blazer 72 swb 4x4

04-09-2005, 11:21 PM	#8
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	ndamerau- the brackets are yours if you want them just shoot me a PM and we'll work out the details. Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

04-06-2005, 08:00 PM	#1
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	FS:Some brackets and lots of Pulleys Here are my collection of pulleys I'm going to get rid of, Price is $10 each delivered for any of these and $20 delivered on the engine brackets OR $75 delivered for everything listed on this post. I do NOT know what each of these pulleys came from, sorry. If interested please reply here along with which pulley you are interested in to keep things in order, and of course buying the whole lot takes precedent over others. Here are the descriptions for them. Top Row-Crank pulleys(1,2,3 from left to right) 1. 3 groove 7 3/4" outer 7 1/4" inners 2 1/4" tall 2. 3 groove 7 3/4" outer 6 3/4" inners 3" tall 3. 2 piece 5 1/4" outer 6 3/4" inner Second Row-water pump pulleys(4,5,6 from left to right) 4. single groove 7 1/8" 2" tall 5. double groove 7 1/8"(both) 2 3/4" tall 6. 3 groove 5 5/8"(all) 3 3/4" tall Third row-water pump pulleys(7,8,9 from left to right) 7. Single groove 6 1/4" 2" tall 8. double groove 5 7/8"(both) 2 3/4" tall 9. double groove 6 1/4" outer 5 3/8" inner 2 3/4" tall Also have 2 spacers; 1- 3" and 1- 1 1/2" On the brackets, I know some are a/c and one is alt. not sure on all though. I'll take $20 delivered for all the brackets in the pic. Attached Images __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles Last edited by mkmiller1; 04-06-2005 at 08:01 PM.

04-06-2005, 09:38 PM	#2
ken betz AKA willie127 Join Date: Jul 2004 Location: Lake City, GA Posts: 72	Pulley and brackets I sent you a pm with details Thanks Ken

04-09-2005, 11:05 PM	#6
ndamerau Active Member Join Date: Feb 2004 Location: Fort Worth, TX Posts: 122	Put me in line for the brackets. If Mr. Betz falls through, I will buy them.

04-09-2005, 11:27 PM	#9
ndamerau Active Member Join Date: Feb 2004 Location: Fort Worth, TX Posts: 122	I am not set up to PM. I will send you an e-mail that you may reply to. Thanks.

04-11-2005, 11:52 PM	#10
ndamerau Active Member Join Date: Feb 2004 Location: Fort Worth, TX Posts: 122	brackets Still want the brackets, waiting for you to tell me where to send the money order. I am set up for PMs now, also. Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.