I need ALL parts to convert power steering if possible - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevy68c10 · 04-13-2005, 05:10 PM

I need a power steering box, a pitman arm ,the power steering pump with brackets & pulley to fit a 350 V-8 engine and if possible the two hoses (pressure line and return line). I might have to buy it all separate, but would like to get it all together.

70c10 · 04-13-2005, 05:29 PM

I have been buying great used parts from pickupman and teeitup. Bill was out of stock recently on the PS conversion so teeitup hooked me up nice and the 71' is now such a pleasure to drive!. These guys are awesome to deal with.

teeitup · 04-13-2005, 05:38 PM

Thanks Jim!!!!!! I think I have the whoole setup out there on a 72 GMC, I'll look when I go out there tonight. Thanks Randy

Chevy68c10 · 04-14-2005, 10:06 AM

Thanks 70c10 for the info....Hey Teeitup, it would be great if You have the whole set up...just let me know how much with shipping -Zip 30519 ,thanks

04-13-2005, 05:10 PM	#1
Chevy68c10 Located in Buford,Georgia Join Date: Apr 2005 Posts: 54	I need ALL parts to convert power steering if possible I need a power steering box, a pitman arm ,the power steering pump with brackets & pulley to fit a 350 V-8 engine and if possible the two hoses (pressure line and return line). I might have to buy it all separate, but would like to get it all together.

04-13-2005, 05:29 PM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	I have been buying great used parts from pickupman and teeitup. Bill was out of stock recently on the PS conversion so teeitup hooked me up nice and the 71' is now such a pleasure to drive!. These guys are awesome to deal with. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-13-2005, 05:38 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Thanks Jim!!!!!! I think I have the whoole setup out there on a 72 GMC, I'll look when I go out there tonight. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-14-2005, 10:06 AM	#4
Chevy68c10 Located in Buford,Georgia Join Date: Apr 2005 Posts: 54	That would be great Thanks 70c10 for the info....Hey Teeitup, it would be great if You have the whole set up...just let me know how much with shipping -Zip 30519 ,thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.