|
04-20-2005, 01:36 AM
|
#1 |
|
Registered User
Join Date: Feb 2003
Location: Lakewood,Ca
Posts: 69
|
4x4 Conversion
Ok I know im beating this to death but here i go anyways.Im going to convert my 2wd to a 4wd on my 69 longbed.From what it looks like for the front spring mount all i have to do is replace my core support mount with a 4wd mount and put the spring mount on the bottom side of that.Is this right?How would i go about locating the correct location for the rear spring shackle mount on the frame?Also any info on how to do crossover steering with a 10 bolt front end would be appreciated.Thanks.
__________________
1969 C-20,383 stroker,sm465,custom long travel front suspension,4 wheel disc brakes,35" pro comps...mods under way include: 4x4 conversion,and custom bumpers.future mods include: gear vendors od unit,and relocation of fuel cell. |
|
|
|
04-21-2005, 12:15 AM
|
#2 |
|
Senior Member
Join Date: Dec 2003
Location: Kingsport TN
Posts: 4,641
|
Your going to have to treat it like a new straight axle convertion mount the front make sure the axle center line is ware you need it take a plum bob hang it from the center of the wheel well as a guid . if it is ware you want it mount the rear spring hanger if its not move the front shackle back our forward.For crossover steering check out ck5.com all you need their.
__________________
Earl 68 2500 4x4 GMC Burb Last edited by earl87gta; 04-21-2005 at 02:09 AM. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
