|
05-06-2005, 01:00 PM
|
#1 |
|
Before and After
Join Date: Feb 2000
Location: Leduc, Alberta CANADA
Posts: 632
|
Engine Mounts
Has anyone tried to install headers to vortec heads (vortec headers) in these trucks? There are no headers for this application. I could use headers for our trucks year, but it wouldnt have the "D" shape for the vortec heads.
Anyway, the headers I have would have to be hammered to fit, and I don't want to do that. There is only a 3/8" problem. Could I raise the front of the engine a 1/2" to clear the headers? If so, How???? My thoughts are if I remove the brackets (engine mounts) from the frame, I could elongate those holes to allow the engine mount to be alligned when there is a 1/2" spacer between them. Is there an easier way?
__________________
Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA |
|
|
|
05-08-2005, 12:23 AM
|
#2 |
|
Before and After
Join Date: Feb 2000
Location: Leduc, Alberta CANADA
Posts: 632
|
Nobody has headers on vortec heads??
TTT.
__________________
Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
