FS: Chevy Stepside Tailgate - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Joe67 · 05-02-2005, 08:00 PM

I have a decent stepside tailgate for sale. Used GM original gate, few dings, very little rust.

Local only, no shipping
Located in Clinton Twp, Michigan 48035

$45.00

**JIMs70GMC** · 05-02-2005, 08:11 PM

absolutely/positively no shipping?

Joe67 · 05-02-2005, 08:15 PM

I currently have nothing to package it in

How interested are you? I could try to dig something up at the local packaging store?

**JIMs70GMC** · 05-02-2005, 08:19 PM

Well i have a stepside bed w/ no tailgate and yours look in good shape, so if you look into packing and shipping to 23323. I'll take it. Look at fedex ground.

Joe67 · 05-02-2005, 08:20 PM

Quote:

Originally Posted by JIMs70GMC

Well i have a stepside bed w/ no tailgate and yours look in good shape, so if you look into packing and shipping to 23323. I'll take it. Look at fedex ground.

Will do, but it will have to be later this week (Wed/Thur)

**JIMs70GMC** · 05-02-2005, 08:37 PM

That's good. All you really need to do is wrap it w/ a cardboard box, you know break the box down and fold it over the tailgate and apply tape liberally. Shipping shouldn't be too bad, i just got some 44lbs springs from wisconsin i beleive earlier this year, shipping was $30 each fedex ground. Thanks,
PM me with the quote and your address and I'll get a MO out to you.

Joe67 · 05-06-2005, 08:42 AM

Quote:

Originally Posted by JIMs70GMC

That's good. All you really need to do is wrap it w/ a cardboard box, you know break the box down and fold it over the tailgate and apply tape liberally. Shipping shouldn't be too bad, i just got some 44lbs springs from wisconsin i beleive earlier this year, shipping was $30 each fedex ground. Thanks,
PM me with the quote and your address and I'll get a MO out to you.

FYI - I wrapped the tailgate this morning. I hope to get a shipping quote later today or Saturday at the latest.

Thanks

**JIMs70GMC** · 05-06-2005, 11:38 AM

Sounds good!

Joe67 · 05-07-2005, 12:05 PM

Quote:

Originally Posted by JIMs70GMC

Sounds good!

You have a PM

**JIMs70GMC** · 05-07-2005, 11:44 PM

You have one back!

Joe67 · 05-08-2005, 11:04 AM

Thanks Jim

Tailgate is sold

*Randy70C-10* · 05-08-2005, 04:55 PM

Hey Jim, wasn't that the last thing that you needed?

05-02-2005, 08:00 PM	#1
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	FS: Chevy Stepside Tailgate I have a decent stepside tailgate for sale. Used GM original gate, few dings, very little rust. Local only, no shipping Located in Clinton Twp, Michigan 48035 $45.00 __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member Last edited by Joe67; 05-02-2005 at 08:04 PM.

05-02-2005, 08:11 PM	#2
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	absolutely/positively no shipping? __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

05-02-2005, 08:15 PM	#3
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	I currently have nothing to package it in How interested are you? I could try to dig something up at the local packaging store? __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

05-02-2005, 08:19 PM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Well i have a stepside bed w/ no tailgate and yours look in good shape, so if you look into packing and shipping to 23323. I'll take it. Look at fedex ground. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

05-02-2005, 08:37 PM	#6
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	That's good. All you really need to do is wrap it w/ a cardboard box, you know break the box down and fold it over the tailgate and apply tape liberally. Shipping shouldn't be too bad, i just got some 44lbs springs from wisconsin i beleive earlier this year, shipping was $30 each fedex ground. Thanks, PM me with the quote and your address and I'll get a MO out to you. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

05-06-2005, 11:38 AM	#8
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Sounds good! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

05-07-2005, 11:44 PM	#10
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	You have one back! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

05-08-2005, 11:04 AM	#11
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Thanks Jim Tailgate is sold __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

05-08-2005, 04:55 PM	#12
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Hey Jim, wasn't that the last thing that you needed?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.