WTB: Exhaust manifolds for K10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gregbr · 05-04-2005, 09:31 PM

How much for a set of factory exhaust manifolds for a 67 K10 with a mid 70's 350. I need it all....mainfolds, bolts, etc. I'm getting tired of the headers. Shipping will probably be hell. Greg

teeitup · 05-04-2005, 10:08 PM

Greg, I got a set on a 72 3/4 4x4 with a 350 in it out there, drivers side has the hole for alt bracket. $60 plus shipping, I won't be able to get them off till next week if you want them. Thanks Randy

TheRedRooster · 05-05-2005, 12:18 AM

I got a set of ram horn manifolds off of a 327. Came off of a 67 1/2 ton with 2 wd. $30 plus shipping
Got the bolts but not the seals/ gaskets.

Jason915 · 05-05-2005, 05:47 PM

40 to your door, they were beadblasted but are now surface rusted but easily cleaned up and coated

**Ironhorse** · 05-05-2005, 07:49 PM

Jason915, Put me in line after "gregbr" on the manifolds. 67152 zip code if that makes a difference.

gregbr · 05-06-2005, 06:12 AM

Jason915, sent you a PM. Thanks.

teeitup · 05-06-2005, 07:21 AM

Good buy Greg, shipping will cost him $15 or so.

gregbr · 05-06-2005, 12:34 PM

Sounds good to me, consider them sold. PM sent.

CAJ68 · 05-09-2005, 06:26 PM

whats wrong with your headers?

05-04-2005, 09:31 PM	#1
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	WTB: Exhaust manifolds for K10 How much for a set of factory exhaust manifolds for a 67 K10 with a mid 70's 350. I need it all....mainfolds, bolts, etc. I'm getting tired of the headers. Shipping will probably be hell. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

05-04-2005, 10:08 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Greg, I got a set on a 72 3/4 4x4 with a 350 in it out there, drivers side has the hole for alt bracket. $60 plus shipping, I won't be able to get them off till next week if you want them. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-05-2005, 12:18 AM	#3
TheRedRooster Registered User Join Date: Dec 2004 Location: The bowels of Los Angeles Posts: 68	I got a set of ram horn manifolds off of a 327. Came off of a 67 1/2 ton with 2 wd. $30 plus shipping Got the bolts but not the seals/ gaskets. Last edited by TheRedRooster; 05-05-2005 at 03:44 PM.

05-05-2005, 05:47 PM	#4
Jason915 Registered User Join Date: Jan 2005 Location: Colorado Springs Posts: 693	40 to your door, they were beadblasted but are now surface rusted but easily cleaned up and coated __________________ 1971 GMC K1500 SWB Fleetside, 4" skyjacker softride and, 14 Bolt FF, HD Dana 44 4.10's 1970 K5 TBI conversion lifted etc SOLD 1968 C20 camper truck SOLD “To ban guns because criminals use them is to tell the innocent and law-abiding that their rights and liberties depend not on their own conduct, but on the conduct of the guilty and the lawless.” Jeff Snyder Last edited by Jason915; 05-05-2005 at 05:48 PM.

05-05-2005, 07:49 PM	#5
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Jason915, Put me in line after "gregbr" on the manifolds. 67152 zip code if that makes a difference. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-06-2005, 06:12 AM	#6
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Jason915, sent you a PM. Thanks. __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424 Last edited by gregbr; 05-06-2005 at 06:13 AM.

05-06-2005, 07:21 AM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Good buy Greg, shipping will cost him $15 or so. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-06-2005, 12:34 PM	#8
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Sounds good to me, consider them sold. PM sent. __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

05-09-2005, 06:26 PM	#9
CAJ68 Registered User Join Date: May 2005 Posts: 80	whats wrong with your headers?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.