![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Apr 2005
Location: Northwest Ohio
Posts: 162
|
![]()
I'm sure this has been asked before, but I'd like to change from drum to disc brakes on the front of my '67 1/2 ton. What other year spindles would work as a direct replacement. I'd rather buy used instead of spending the big bucks for a kit. I'd also like to stay with the 6 lug set-up instead of changing to 5 lug, but I'm not aware if chevrolet used a 6 lug disc from the factory. AP
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2004
Location: Wichita, Kansas 67212
Posts: 257
|
I'm not an expert on this but I think you'll have to go 5 lug. I did a 70 and changed the whole suspension/The hard way! (used 71-72 parts) I found out later it's easier to drop the whole crosmember. The crosmember from a truck all the way to 1987 will bolt right in. Calipers and hoses are more plentifull for those (newer) years. I'm sure guys with more knowledge will respond. Seems I saw the 5 lug-6 lug question come up before? Maybe someone makes a 6 lug rotor??
Last edited by cadiac; 05-15-2005 at 12:42 PM. |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Sep 2004
Location: CANADA
Posts: 1,681
|
you can get afrter market 6 lug rotors but there was no factory 6 lug rotors
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Apr 2005
Location: Northwest Ohio
Posts: 162
|
Thanks for the information. I appreciate it Alan
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|