ultimate frustration - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jerry moss** · 08-03-2002, 05:26 PM

went to a wrecking yard this morning, as i'm walking in past the holding area (where vehicles waiting for dmv clearance are kept) i see a 68 gmc right next to the chain link fence. i stopped to peek through the fence into the passenger side window and staring back at me is a speedwarning insturment cluster. i tried bribing one of the yard workers with some cash but he said i would have to talk to his boss-- who isn't there on weekends. he says it will probably be put out in the yard on tuesday or thursday,he wasn't sure which-- either way, i'll be at work. now i need to find a friend that isn't working next week to watch for it.
thanks for letting me vent !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Bill72BB · 08-03-2002, 06:43 PM

Jerry ;

I'm retired and willing to help but you are in the wrong Brentwood.

Bill

**smitty62** · 08-03-2002, 07:05 PM

Yeah, I really feel sorry for you guys living in a nearly rust-free zone where a 30 year old part is still like new as far as integrity. Maybe Ca. should have to spread salt on the roads everytime it rains just so they won't have an advantage over the rest of the country. Have to take that up with the treehuggers

**jerry moss** · 08-03-2002, 07:08 PM

Bill,
thanks for the offer, i wish you were closer. i have a friend lined up for wednesday, hopefully.

**jerry moss** · 08-03-2002, 07:22 PM

smitty,
lol. treehuggers are plentiful out here, thats for sure. i've never been to an area that uses salt so i would probably not like the trucks i would see. we still have lots of trucks/parts to choose from out here, i'm sure the rustbelt folks would kick my a$$ if they could see sheetmetal that i pass on buying. i walked away from a 69-70 gmc today that had original paint and no rust in the front fenders but they had a small hole drilled on top of each fender and a couple small dings in the bottom below the molding. the grille was really straight also but had foglight brackets mounted on either side of the cross bar.

**smitty62** · 08-03-2002, 07:40 PM

Bend over! HAVE YOU NO SHAME!

08-03-2002, 05:26 PM	#1
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,861	ultimate frustration went to a wrecking yard this morning, as i'm walking in past the holding area (where vehicles waiting for dmv clearance are kept) i see a 68 gmc right next to the chain link fence. i stopped to peek through the fence into the passenger side window and staring back at me is a speedwarning insturment cluster. i tried bribing one of the yard workers with some cash but he said i would have to talk to his boss-- who isn't there on weekends. he says it will probably be put out in the yard on tuesday or thursday,he wasn't sure which-- either way, i'll be at work. now i need to find a friend that isn't working next week to watch for it. thanks for letting me vent !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

08-03-2002, 06:43 PM	#2
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	Jerry ; I'm retired and willing to help but you are in the wrong Brentwood. Bill __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

08-03-2002, 07:05 PM	#3
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Yeah, I really feel sorry for you guys living in a nearly rust-free zone where a 30 year old part is still like new as far as integrity. Maybe Ca. should have to spread salt on the roads everytime it rains just so they won't have an advantage over the rest of the country. Have to take that up with the treehuggers __________________ Stepsides look like real trucks! Smitty

08-03-2002, 07:08 PM	#4
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,861	Bill, thanks for the offer, i wish you were closer. i have a friend lined up for wednesday, hopefully. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

08-03-2002, 07:22 PM	#5
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,861	smitty, lol. treehuggers are plentiful out here, thats for sure. i've never been to an area that uses salt so i would probably not like the trucks i would see. we still have lots of trucks/parts to choose from out here, i'm sure the rustbelt folks would kick my a$$ if they could see sheetmetal that i pass on buying. i walked away from a 69-70 gmc today that had original paint and no rust in the front fenders but they had a small hole drilled on top of each fender and a couple small dings in the bottom below the molding. the grille was really straight also but had foglight brackets mounted on either side of the cross bar. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

08-03-2002, 07:40 PM	#6
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Bend over! HAVE YOU NO SHAME! __________________ Stepsides look like real trucks! Smitty

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.