Parting Out (2) 67-72 Blazers in NE PA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BackWoodsRanch · 05-21-2005, 09:19 AM

Tearing down starting this weekend two '70 or so blazers.
No titles, so parts only.

Sold some items so listing changes.

One is a '71 6-cyl with head removed, and flywheel from stick.
Other is a '72 that was CST with V-8 Auto

Items I took off are a rather solid GMC tailgate in primer. $80
Dash cluster from CST, no tach but all other gages. $30
Single-wall top stainless hold-down trim pieces. $30/Pr
Marker lights (Split Style), have all 4, ($20 each or $50 all)
3" Front Lift Springs, not sure if re-arched or aftermarket, includes front u-bolts and rear lift blocks, no rear u-bolts $95
12-bolt 4wd Posi from CST 3:05 gears, $80
Removable Tops, no lift gates - $30 each

Body parts are pretty rough.
Do Not Have Seats or Seat Brackets, or Carpet Strips

Will not ship anything big or heavy. Can e-mail pics.

Located just below Wilkes-Barre PA.

E-mail with Needs:
bwranch@epix.net

MIDSTATE__67-72 · 05-21-2005, 09:53 AM

e mail sent

68haywagon · 05-21-2005, 10:53 AM

to the board from W-B!! I don't have a blazer so I don't need anyparts,

if you ever get any truck parts let me know because I in need of a few parts that are to big to ship.

Good luck,
Mike

BackWoodsRanch · 05-21-2005, 11:02 AM

Quote:

Originally Posted by 68haywagon

to the board from W-B!! I don't have a blazer so I don't need anyparts,

if you ever get any truck parts let me know because I in need of a few parts that are to big to ship.

Good luck,
Mike

Let me know what you need, have quite a few parts around.

Steve

mkmiller1 · 05-21-2005, 11:14 AM

Do you have any of the bucket seat brackets for both sides and the backs on the seats?
PM sent.
Thanks,
Matthew

**Gary 70 Jimmy** · 05-21-2005, 11:22 AM

Need roll bar, rear chrome carpet hold strips, tow hooks, white door panels wood trim. thanks Gary
where do you live in PA maybe I can come look at your parts.

HeavyK20 · 05-21-2005, 11:24 AM

Could you email some pics of the frame cross members and rear spring hangers?

jose · 05-21-2005, 11:28 AM

Email sent

LUV2XCLR8 · 05-21-2005, 11:34 AM

Rear side panel brackets, Am/Fm radio

knsmodels · 05-21-2005, 02:14 PM

thanks

**6t727t2** · 05-21-2005, 09:24 PM

Email sent

71HUGGER396 · 05-21-2005, 11:17 PM

Put me in line for the front seat brackets if you have any, really need just the driver's side. ............how much? THANKS

BackWoodsRanch · 05-22-2005, 09:08 AM

Quote:

Originally Posted by 71HUGGER396

Put me in line for the front seat brackets if you have any, really need just the driver's side. ............how much? THANKS

Need help on how to find the parts that you guys are looking for, I'm not a chevy man. If it is the verticle rise piece between the front and rear floors that the bucket seat bolts through, then they are rusted. If it is something else, let me know. I have been travelling and haven't had much time to look for parts, but will try to do so today.

BackWoodsRanch · 05-22-2005, 09:10 AM

Quote:

Originally Posted by Gary 70 Jimmy

Need roll bar, rear chrome carpet hold strips, tow hooks, white door panels wood trim. thanks Gary
where do you live in PA maybe I can come look at your parts.

I know I have a rollbar in one of them. Will check on the carpet strips.
I am about 3 hours east of the Ohio border.

Steve

BackWoodsRanch · 05-22-2005, 09:13 AM

Quote:

Originally Posted by HeavyK20

Could you email some pics of the frame cross members and rear spring hangers?

Send an e-mail address, also what areas particularly have problems the need to be looked at?

Steve

mkmiller1 · 05-22-2005, 10:58 AM

The seats brackets I need are the ones that bolt to the bottom of the seats and the floor. They're the brackets "between" the seats and floor.
Thanks,
Matthew

ken betz · 05-22-2005, 04:44 PM

I sent you a PM
Ken

71HUGGER396 · 05-22-2005, 05:06 PM

I just need the driver's side brackets that go between the seat and the floor.

55454 · 05-22-2005, 05:18 PM

Do you have the gas filler neck and the gas filler neck inside three sided cover. I e-mailed you to get your # to explain the brackets I am looking for.

Thanks

BackWoodsRanch · 05-22-2005, 09:17 PM

I got a chance to look at a few things this afternoon.
The buckets that are in one do not appear original.
They don't have the brackets that everyone keeps asking about, they are bolted straight down through the floor. The other one has no seats or bracket. I have 1 blue console that looks original. 1 rear seat, but not sure if it is original. No carpet strips. Have 1 set of rear inner panel brackets. Frame pictures will have to wait a few days. No marker lights. 1 Decent GMC tailgate. 1 Orange Rollbar Bolt-in. One hatch but it is destroyed. One had air but most of the interior vents are gone. No radios.

71swb4x4 · 05-22-2005, 09:33 PM

Does the hatch have a good hatch handle? And do you have the keys for that Blazer? If so I am interested in it.

badpeanut · 05-23-2005, 07:28 AM

I'm looking for the metal strips that hold the weatherstrip on to the body on the vertical edges where the tailgate closes against it. They are attached with about four phillips head screws, and I think they are the same from side to side. I need two.

*bisquik65* · 05-23-2005, 08:54 AM

I need a good set of sunvisors (blazer only)

71HUGGER396 · 05-23-2005, 04:39 PM

The brackets are on the bottom of the seats. You take the seat out, flip it over, and you can unbolt the bracket from the seat. Where in Pa are you located? How much for the console? What shape is it in?

70GMCer · 05-23-2005, 06:02 PM

I'm looking for the upper alternator adjustment bracket for a V8.......

05-21-2005, 09:19 AM	#1
BackWoodsRanch Registered User Join Date: May 2005 Posts: 24	Parting Out (2) 67-72 Blazers in NE PA Tearing down starting this weekend two '70 or so blazers. No titles, so parts only. Sold some items so listing changes. One is a '71 6-cyl with head removed, and flywheel from stick. Other is a '72 that was CST with V-8 Auto Items I took off are a rather solid GMC tailgate in primer. $80 Dash cluster from CST, no tach but all other gages. $30 Single-wall top stainless hold-down trim pieces. $30/Pr Marker lights (Split Style), have all 4, ($20 each or $50 all) 3" Front Lift Springs, not sure if re-arched or aftermarket, includes front u-bolts and rear lift blocks, no rear u-bolts $95 12-bolt 4wd Posi from CST 3:05 gears, $80 Removable Tops, no lift gates - $30 each Body parts are pretty rough. Do Not Have Seats or Seat Brackets, or Carpet Strips Will not ship anything big or heavy. Can e-mail pics. Located just below Wilkes-Barre PA. E-mail with Needs: bwranch@epix.net Last edited by BackWoodsRanch; 05-30-2005 at 10:45 PM. Reason: Sold some items

05-21-2005, 09:53 AM	#2
MIDSTATE__67-72 Senior Member Join Date: Oct 2004 Location: decatur, il Posts: 199	parts e mail sent

05-21-2005, 10:53 AM	#3
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	to the board from W-B!! I don't have a blazer so I don't need anyparts, if you ever get any truck parts let me know because I in need of a few parts that are to big to ship. Good luck, Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

05-21-2005, 11:14 AM	#5
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	Do you have any of the bucket seat brackets for both sides and the backs on the seats? PM sent. Thanks, Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

05-21-2005, 11:24 AM	#7
HeavyK20 Registered User Join Date: Dec 2001 Location: New Richmond, WI Posts: 547	Could you email some pics of the frame cross members and rear spring hangers? __________________ Eric 1969 K20, 465/205 package

05-21-2005, 11:22 AM	#6
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Need roll bar, rear chrome carpet hold strips, tow hooks, white door panels wood trim. thanks Gary where do you live in PA maybe I can come look at your parts.

05-21-2005, 11:28 AM	#8
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	Email sent __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

05-21-2005, 11:34 AM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Rear side panel brackets, Am/Fm radio __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-21-2005, 02:14 PM	#10
knsmodels I make Models Join Date: May 2005 Location: Bucks, PA Posts: 626	PM sent thanks

05-21-2005, 09:24 PM	#11
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,456	Email sent

05-21-2005, 11:17 PM	#12
71HUGGER396 Confirmed Truckaholic Join Date: Oct 2000 Location: Sarver,PA 16055 Posts: 732	Put me in line for the front seat brackets if you have any, really need just the driver's side. ............how much? THANKS __________________ 1968 50th STEP SIDE SHORTY, 350/350, a/c, ps, p,b Daily Driver, 1970 Cst short fleet, all black, 350/350, 1970 2wd Blazer, 2wd, 6 cyl. 3 spd, original, now a 454, 350turbo, 3.73 posi, on the road 1971 2wd fleet shorty, 454, 700r4, 3.73 posi, SOLD to 67OLDSTYLE72 "My rig's a little old but that don't mean she's slow" - SAWYER BROWN's Six Days On The Road SEMPER FI "I use to be a lean mean fighting machine, but now I'm a huffin, puffin, over stuffin love muffin"

05-22-2005, 10:58 AM	#16
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	The seats brackets I need are the ones that bolt to the bottom of the seats and the floor. They're the brackets "between" the seats and floor. Thanks, Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

05-22-2005, 04:44 PM	#17
ken betz AKA willie127 Join Date: Jul 2004 Location: Lake City, GA Posts: 72	PM sent I sent you a PM Ken

05-22-2005, 05:06 PM	#18
71HUGGER396 Confirmed Truckaholic Join Date: Oct 2000 Location: Sarver,PA 16055 Posts: 732	I just need the driver's side brackets that go between the seat and the floor. __________________ 1968 50th STEP SIDE SHORTY, 350/350, a/c, ps, p,b Daily Driver, 1970 Cst short fleet, all black, 350/350, 1970 2wd Blazer, 2wd, 6 cyl. 3 spd, original, now a 454, 350turbo, 3.73 posi, on the road 1971 2wd fleet shorty, 454, 700r4, 3.73 posi, SOLD to 67OLDSTYLE72 "My rig's a little old but that don't mean she's slow" - SAWYER BROWN's Six Days On The Road SEMPER FI "I use to be a lean mean fighting machine, but now I'm a huffin, puffin, over stuffin love muffin"

05-22-2005, 05:18 PM	#19
55454 55454 Join Date: Mar 2005 Location: Lafayette La. Posts: 340	Do you have the gas filler neck and the gas filler neck inside three sided cover. I e-mailed you to get your # to explain the brackets I am looking for. Thanks



Register or Log In To remove these advertisements.

05-22-2005, 09:17 PM	#20
BackWoodsRanch Registered User Join Date: May 2005 Posts: 24	I got a chance to look at a few things this afternoon. The buckets that are in one do not appear original. They don't have the brackets that everyone keeps asking about, they are bolted straight down through the floor. The other one has no seats or bracket. I have 1 blue console that looks original. 1 rear seat, but not sure if it is original. No carpet strips. Have 1 set of rear inner panel brackets. Frame pictures will have to wait a few days. No marker lights. 1 Decent GMC tailgate. 1 Orange Rollbar Bolt-in. One hatch but it is destroyed. One had air but most of the interior vents are gone. No radios.

05-22-2005, 09:33 PM	#21
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Does the hatch have a good hatch handle? And do you have the keys for that Blazer? If so I am interested in it. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

05-23-2005, 07:28 AM	#22
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	I'm looking for the metal strips that hold the weatherstrip on to the body on the vertical edges where the tailgate closes against it. They are attached with about four phillips head screws, and I think they are the same from side to side. I need two.

05-23-2005, 08:54 AM	#23
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I need a good set of sunvisors (blazer only)

05-23-2005, 04:39 PM	#24
71HUGGER396 Confirmed Truckaholic Join Date: Oct 2000 Location: Sarver,PA 16055 Posts: 732	The brackets are on the bottom of the seats. You take the seat out, flip it over, and you can unbolt the bracket from the seat. Where in Pa are you located? How much for the console? What shape is it in? __________________ 1968 50th STEP SIDE SHORTY, 350/350, a/c, ps, p,b Daily Driver, 1970 Cst short fleet, all black, 350/350, 1970 2wd Blazer, 2wd, 6 cyl. 3 spd, original, now a 454, 350turbo, 3.73 posi, on the road 1971 2wd fleet shorty, 454, 700r4, 3.73 posi, SOLD to 67OLDSTYLE72 "My rig's a little old but that don't mean she's slow" - SAWYER BROWN's Six Days On The Road SEMPER FI "I use to be a lean mean fighting machine, but now I'm a huffin, puffin, over stuffin love muffin" Last edited by 71HUGGER396; 05-23-2005 at 04:40 PM.

05-23-2005, 06:02 PM	#25
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	I'm looking for the upper alternator adjustment bracket for a V8....... __________________ 1997 GMC Sierra Ext 1965 Mustang

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.