Hummer Wheels question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rich-white · 05-25-2005, 10:27 PM

I was given a set of hummer wheels that a knucklehead, uh I mean gentleman was THROWING AWAY

. I didn't get the tires.. A friend of mines son works for a guy that had these and got rid of his hummer and didn't need the wheels and tires that had 20 miles on them.

To install these on a 3/4 ton 4x4 77 pickup besides cutiing the center out of two of the center caps what do I need to do or get?

tgh117 · 05-26-2005, 12:13 PM

Send a PM to bisquik65. He posted on the 73-87 message board about putting H2 wheels on his suburban. The only thing he said he needed was lugnuts off a newer truck to hold the center caps on. I woudl say if you got the lug nuts as well, then you shouldn't need anything at all. Good luck

Brewski* · 05-26-2005, 01:52 PM

I put a set of H2 wheels and tires on my 71 3/4 ton 4x4 GMC I had to lift it 4" for clearance but if you have smaller tires on them they would fit. You do need the big conacle lug nuts.

Prerunner1982 · 05-26-2005, 03:18 PM

was hoping you were speaking of H1 wheels, but i suppose if your 77 is needing some

then H2 wheels would work.. no offense...

bouncytruck · 05-26-2005, 03:39 PM

There are several guys on ColoradoK5 and Pirate4x4 running H1 wheels.

rich-white · 05-27-2005, 08:39 PM

nope these are the H2 wheels brushed alum finish.

05-25-2005, 10:27 PM	#1
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Hummer Wheels question I was given a set of hummer wheels that a knucklehead, uh I mean gentleman was THROWING AWAY . I didn't get the tires.. A friend of mines son works for a guy that had these and got rid of his hummer and didn't need the wheels and tires that had 20 miles on them. To install these on a 3/4 ton 4x4 77 pickup besides cutiing the center out of two of the center caps what do I need to do or get?

05-26-2005, 12:13 PM	#2
tgh117 Crazy Join Date: Apr 2005 Location: Emmaus, Pa Posts: 203	Send a PM to bisquik65. He posted on the 73-87 message board about putting H2 wheels on his suburban. The only thing he said he needed was lugnuts off a newer truck to hold the center caps on. I woudl say if you got the lug nuts as well, then you shouldn't need anything at all. Good luck __________________ 77 SB Stepside in a bunch of pieces scattered around the garage.

05-26-2005, 03:18 PM	#4
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	was hoping you were speaking of H1 wheels, but i suppose if your 77 is needing some then H2 wheels would work.. no offense... __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

05-26-2005, 03:39 PM	#5
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	There are several guys on ColoradoK5 and Pirate4x4 running H1 wheels. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-26-2005, 01:52 PM	#3
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	I put a set of H2 wheels and tires on my 71 3/4 ton 4x4 GMC I had to lift it 4" for clearance but if you have smaller tires on them they would fit. You do need the big conacle lug nuts.

05-27-2005, 08:39 PM	#6
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	nope these are the H2 wheels brushed alum finish.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.