C/30 Disc Tag/GM - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RPOZ11 · 05-30-2005, 07:09 PM

Just for those of us who like to ID GM stuff, here is the original disc tag on my 1972 C/30 402 LongHorn....I will get at the coil spring tag shortly...

LUV2XCLR8 · 05-30-2005, 07:44 PM

Longhorn Man · 05-30-2005, 08:26 PM

Pretty sweet huh? MtDave's 72 Longhorn (Or is it a 71?) was like that. Stickers on the drums...everything.

RPOZ11 · 05-30-2005, 09:36 PM

I decided to do the LongHorn after all. My Painter/Bodyman is a flake, like every one of them I just told him we will stop on The COPO car and do this first as I have great needs for this truck.
I took off the front 16.5 orig rims and placed them on my CC 3/4 72. I will Go with the 16X6's or 7's ---whatever they are that I have--They are stamped AA and XB I think.
Anyways, I should have the cab stripped to be Chem-Dipped after the rust repairs, cab mount supports, and lower rockers are replaced. Then it will get jammed white.
Once I get the cab back I will re-assemble that cab from the 2 I have to make one complete original assembly. As the cab is finished I will re-do the whole front suspension, take the rear axle out and have it re-done, and Imron Black the frame for re-sassembly.
I have so many neat parts for this thing besides the original equipment rare options it came with that it should be pretty nice when I am do with her.
I only have this week and weekends after this until September to get her where I want her.
On the other C/20 I have , I will need to locate a replacement cab for that one to bring that one back to drive-able. Picked up a std 350 2-bolt shortblock, will 383 her with 9:1 and a 700R-4. That should be a good utility truck so I dont rack up the miles on the LongHorn.
I am undecided as to place the #'s matching motor back in or continue with the 496 I have. I think I like torque more. we'll see......

Longhorn Man · 05-30-2005, 09:40 PM

sweeeeet

RPOZ11 · 05-30-2005, 09:49 PM

LongHorn Man: Did you notice the overload front shocks on this thing in my pic? CAN YOU SAY: OVERKILL???

Robert1970C20rstbukt · 05-30-2005, 10:47 PM

Awesome! I saved the front end of a '72 GMC 3500 that I scrapped a couple months ago, and both of the rotors have those stickers too.

RPOZ11 · 05-31-2005, 09:23 PM

I got the rims down to be powdercoated arctic white today. Dug out the pressure blaster and cleaned off the spindles and wheel well areas. Now it's time to disassemble the front suspension...

Robert1970C20rstbukt · 05-31-2005, 10:19 PM

What size rims are you running on your truck? I had some 16.5's but traded 'em for 16's.

RPOZ11 · 05-31-2005, 10:36 PM

I still have the original 16.5's it came with along with an extra set he had that he gave me when I purchased the LongHorn
I will run th 16X6.5's.......

RPOZ11 · 06-01-2005, 06:41 PM

Well, I FINALLY got the Cab stripped down to bare.
We will be fabricating a rolling cart for it to be moved on.
I will need to locate and buy the underside cab supports as they will need to be replaced.
Any suppliers in SoCalif? that you know of???
I have a set of NOS rockers that I will be using to replace the originals and after that I dont see anymore rust.
Once the welding is all done, I will take it to be chem stripped then I will reassemble the cab after painting it all White.
I will be needing to replace the upper interior headliner trim and need a supplier on that as well!
The Green headliner I took out seems pretty mint but I want to go with a Black one so if anyone needs this one, let me know.
I have the green door panels that will go too; the driver's side has its typical use and wear to it but the passenger's side seems rather nice. Might have both green A/C dash ducts to go too.
Eventually I will need to find another 72 cab to use on this chassis as I have darn near all of it to put another truck back together.
Any thoughts...?
Thanx!!

RPOZ11 · 06-01-2005, 06:51 PM

Anyone have any answers to what each set of numbers correctly represent???

Robert1970C20rstbukt · 06-01-2005, 08:03 PM

I know that CE20934 is the model number. The one on my truck says CE26034.

RPOZ11 · 06-05-2005, 10:12 PM

Yo! Robert and Longhorn Man: I bought a new toy to do my truck with...check this out:

Man, am I in Heaven NOW!!!!

Robert1970C20rstbukt · 06-05-2005, 11:17 PM

Awesome! Wish I had one of those!

RPOZ11 · 06-05-2005, 11:27 PM

I stole this thing! $600 and it is all 1/4" box steel!!!!! That guy spent ALOT on this thing!!!!!!!

RPOZ11 · 06-05-2005, 11:30 PM

New body guy now, he will begin rust repairs July 2nd week! :-)

05-30-2005, 07:09 PM	#1
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	1972 C/30 BB LongHorn Disc Tag/GM Just for those of us who like to ID GM stuff, here is the original disc tag on my 1972 C/30 402 LongHorn....I will get at the coil spring tag shortly... Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS Last edited by RPOZ11; 05-30-2005 at 07:12 PM.

05-30-2005, 07:44 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	__________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-30-2005, 09:36 PM	#4
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	YO! LongHorn Man.... I decided to do the LongHorn after all. My Painter/Bodyman is a flake, like every one of them I just told him we will stop on The COPO car and do this first as I have great needs for this truck. I took off the front 16.5 orig rims and placed them on my CC 3/4 72. I will Go with the 16X6's or 7's ---whatever they are that I have--They are stamped AA and XB I think. Anyways, I should have the cab stripped to be Chem-Dipped after the rust repairs, cab mount supports, and lower rockers are replaced. Then it will get jammed white. Once I get the cab back I will re-assemble that cab from the 2 I have to make one complete original assembly. As the cab is finished I will re-do the whole front suspension, take the rear axle out and have it re-done, and Imron Black the frame for re-sassembly. I have so many neat parts for this thing besides the original equipment rare options it came with that it should be pretty nice when I am do with her. I only have this week and weekends after this until September to get her where I want her. On the other C/20 I have , I will need to locate a replacement cab for that one to bring that one back to drive-able. Picked up a std 350 2-bolt shortblock, will 383 her with 9:1 and a 700R-4. That should be a good utility truck so I dont rack up the miles on the LongHorn. I am undecided as to place the #'s matching motor back in or continue with the 496 I have. I think I like torque more. we'll see...... __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

05-30-2005, 09:49 PM	#6
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	LongHorn Man: Did you notice the overload front shocks on this thing in my pic? CAN YOU SAY: OVERKILL??? __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

05-30-2005, 10:47 PM	#7
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Awesome! I saved the front end of a '72 GMC 3500 that I scrapped a couple months ago, and both of the rotors have those stickers too. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

05-30-2005, 08:26 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Pretty sweet huh? MtDave's 72 Longhorn (Or is it a 71?) was like that. Stickers on the drums...everything.

05-30-2005, 09:40 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	sweeeeet

05-31-2005, 09:23 PM	#8
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	I got the rims down to be powdercoated arctic white today. Dug out the pressure blaster and cleaned off the spindles and wheel well areas. Now it's time to disassemble the front suspension... __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS Last edited by RPOZ11; 05-31-2005 at 09:25 PM.

05-31-2005, 10:19 PM	#9
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	What size rims are you running on your truck? I had some 16.5's but traded 'em for 16's. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

05-31-2005, 10:36 PM	#10
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	I still have the original 16.5's it came with along with an extra set he had that he gave me when I purchased the LongHorn I will run th 16X6.5's....... __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

06-01-2005, 06:41 PM	#11
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Cab Update Well, I FINALLY got the Cab stripped down to bare. We will be fabricating a rolling cart for it to be moved on. I will need to locate and buy the underside cab supports as they will need to be replaced. Any suppliers in SoCalif? that you know of??? I have a set of NOS rockers that I will be using to replace the originals and after that I dont see anymore rust. Once the welding is all done, I will take it to be chem stripped then I will reassemble the cab after painting it all White. I will be needing to replace the upper interior headliner trim and need a supplier on that as well! The Green headliner I took out seems pretty mint but I want to go with a Black one so if anyone needs this one, let me know. I have the green door panels that will go too; the driver's side has its typical use and wear to it but the passenger's side seems rather nice. Might have both green A/C dash ducts to go too. Eventually I will need to find another 72 cab to use on this chassis as I have darn near all of it to put another truck back together. Any thoughts...? Thanx!! Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS Last edited by RPOZ11; 06-01-2005 at 06:42 PM.

06-01-2005, 06:51 PM	#12
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Firewall Crayon Text... Anyone have any answers to what each set of numbers correctly represent??? Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

06-01-2005, 08:03 PM	#13
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	I know that CE20934 is the model number. The one on my truck says CE26034. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

06-05-2005, 10:12 PM	#14
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	New toy for the project! Yo! Robert and Longhorn Man: I bought a new toy to do my truck with...check this out: Man, am I in Heaven NOW!!!! Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS Last edited by RPOZ11; 06-05-2005 at 10:13 PM.

06-05-2005, 11:17 PM	#15
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Awesome! Wish I had one of those! __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck



Register or Log In To remove these advertisements.

06-05-2005, 11:27 PM	#16
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	I stole this thing! $600 and it is all 1/4" box steel!!!!! That guy spent ALOT on this thing!!!!!!! __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

06-05-2005, 11:30 PM	#17
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	New body guy now, he will begin rust repairs July 2nd week! :-) __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.