Still very much in need of C50 fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

T.Matthews · 05-29-2005, 09:31 PM

AS teh title says. I'm still looking for left and right fenders for a C 50 chevy truck. Anybody?

*72CSTC5* · 05-30-2005, 01:37 PM

Hey post a pic of the ones you need again because i think I read your thread last time and you indicated that there were two different styles. I pass one of those trucks everyday when I go to work down I-10 between Houston and Beaumont Texas. If they are the same i will approach the owner for you.

T.Matthews · 05-30-2005, 09:10 PM

I can't put a picture on for some reason so please go to my web site and check it out. www.tmatthews.net
Thanks

biglou55 · 05-31-2005, 08:51 AM

did you ever get in contact with cotton tree service in northampton ma. they have a 71 dump truck. I looked at it last year and what i can remember it looked pretty good. it has a 427 goodwrench engine in it. the whole truck is complete.

T.Matthews · 06-02-2005, 09:12 AM

I called and they didn't know what I was talking about.

**kwmech** · 06-02-2005, 10:41 PM

How about---MAYBE---a whole running truck. May be up for sale 1971 C-50, 366 engine,HEI, 4 speed automatic (allison i think) 2 speed rear axle. 14 or 16 foot flatbed, 2k liftgate. May need brakes, it stops but I wouldn't trust it with a full load. Do not have pics yet. Maybe this weekend. Do not have a price yet either.

stllookn · 06-02-2005, 11:44 PM

How about an entire truck with the tack dash and all...it looks pretty good. I will post a pic if you are interested. This post is worthless without pictures...LOL!

biglou55 · 06-03-2005, 06:49 AM

I know that truck is there. My son was there two weeks a go and saw it sitting thier. some one there told him 1,500 for it but i am pretty sure you can get it much cheaper.

T.Matthews · 06-03-2005, 08:33 PM

http://www.tmatthews.net/DSC00607.JPG

follow link to dump truck

stllookn · 06-05-2005, 12:40 AM

Here's the C50 that is for sale here. It is a runner and looks great! It has one broken wind wing and nest of yellow jackets on the dash (partially covering the speedo). One quick spray of Yellow Jacket killer would handle that. This is a nice truck. It was owned by a monument company in Centralia. Two (2) tow hooks on the front bumper too...LOL!

**kwmech** · 06-05-2005, 01:53 AM

How much?

stllookn · 06-05-2005, 12:14 PM

If you are seriously interested, I will check. It has been at a used truck/implement dealer that is not in a high traffic area so it is not in a high visibility area. I drove by it for months before I noticed it. It used to have a small boom crane between the cab and bed to lift and unload the monuments. It is in excellent good condition from the rust and dent standpoint. The odometer has 30,000+ on it. I suspect that it has turned over once.

**kwmech** · 06-05-2005, 12:42 PM

I thought when you stopped and took the pic you may have looked at the for sale sign closer. Have one locally I am looking at today.

GMC AMI · 06-05-2005, 03:34 PM

http://cgi.ebay.com/ebaymotors/ws/eB...978589821&rd=1

stllookn · 06-05-2005, 05:34 PM

Mike, that one looks like a good price! kwmech...no price on the For Sale sign and the business was closed. Sounds like you are covered locally so I will let it sit.

**kwmech** · 06-05-2005, 08:06 PM

I'd buy that if I were closer, cheap reserve price. What is weird is that truck has 6 bolt front wheels, the truck I looked at today had 10 bolt wheels and the truck pictured in this thread has 5 bolt wheels? Must be quite a few different axles weights that were avail. (I'm looking at the front wheels) Somebody was telling me that there is an International front axle assy. that will fit in these trucks that has disc brakes on them.?

T.Matthews · 06-09-2005, 10:59 PM

anybody else?

05-29-2005, 09:31 PM	#1
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	Still very much in need of C50 fenders AS teh title says. I'm still looking for left and right fenders for a C 50 chevy truck. Anybody?

05-31-2005, 08:51 AM	#4
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	did you ever get in contact with cotton tree service in northampton ma. they have a 71 dump truck. I looked at it last year and what i can remember it looked pretty good. it has a 427 goodwrench engine in it. the whole truck is complete. __________________ Certifiably crazy person Last edited by biglou55; 05-31-2005 at 08:52 AM.

06-02-2005, 11:44 PM	#7
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	How about an entire truck with the tack dash and all...it looks pretty good. I will post a pic if you are interested. This post is worthless without pictures...LOL! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

06-03-2005, 06:49 AM	#8
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	I know that truck is there. My son was there two weeks a go and saw it sitting thier. some one there told him 1,500 for it but i am pretty sure you can get it much cheaper. __________________ Certifiably crazy person

06-05-2005, 12:40 AM	#10
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Here's the C50 that is for sale here. It is a runner and looks great! It has one broken wind wing and nest of yellow jackets on the dash (partially covering the speedo). One quick spray of Yellow Jacket killer would handle that. This is a nice truck. It was owned by a monument company in Centralia. Two (2) tow hooks on the front bumper too...LOL! Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 06-05-2005 at 12:47 AM.

05-30-2005, 01:37 PM	#2
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Hey post a pic of the ones you need again because i think I read your thread last time and you indicated that there were two different styles. I pass one of those trucks everyday when I go to work down I-10 between Houston and Beaumont Texas. If they are the same i will approach the owner for you.

05-30-2005, 09:10 PM	#3
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	I can't put a picture on for some reason so please go to my web site and check it out. www.tmatthews.net Thanks

06-02-2005, 09:12 AM	#5
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	I called and they didn't know what I was talking about.

06-02-2005, 10:41 PM	#6
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,580	How about---MAYBE---a whole running truck. May be up for sale 1971 C-50, 366 engine,HEI, 4 speed automatic (allison i think) 2 speed rear axle. 14 or 16 foot flatbed, 2k liftgate. May need brakes, it stops but I wouldn't trust it with a full load. Do not have pics yet. Maybe this weekend. Do not have a price yet either.

06-03-2005, 08:33 PM	#9
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	http://www.tmatthews.net/DSC00607.JPG follow link to dump truck

06-05-2005, 01:53 AM	#11
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,580	How much?

06-05-2005, 12:14 PM	#12
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	If you are seriously interested, I will check. It has been at a used truck/implement dealer that is not in a high traffic area so it is not in a high visibility area. I drove by it for months before I noticed it. It used to have a small boom crane between the cab and bed to lift and unload the monuments. It is in excellent good condition from the rust and dent standpoint. The odometer has 30,000+ on it. I suspect that it has turned over once. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

06-05-2005, 12:42 PM	#13
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,580	I thought when you stopped and took the pic you may have looked at the for sale sign closer. Have one locally I am looking at today.

06-05-2005, 03:34 PM	#14
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	http://cgi.ebay.com/ebaymotors/ws/eB...978589821&rd=1 __________________ 1968 Chevy 4x4 307 4 speed

06-05-2005, 05:34 PM	#15
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Mike, that one looks like a good price! kwmech...no price on the For Sale sign and the business was closed. Sounds like you are covered locally so I will let it sit. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)



Register or Log In To remove these advertisements.

06-05-2005, 08:06 PM	#16
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,580	I'd buy that if I were closer, cheap reserve price. What is weird is that truck has 6 bolt front wheels, the truck I looked at today had 10 bolt wheels and the truck pictured in this thread has 5 bolt wheels? Must be quite a few different axles weights that were avail. (I'm looking at the front wheels) Somebody was telling me that there is an International front axle assy. that will fit in these trucks that has disc brakes on them.?

06-09-2005, 10:59 PM	#17
T.Matthews Registered User Join Date: Feb 2005 Location: Dunstable, MA Posts: 60	anybody else?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.