67 SWB Stepside Bed W/No cutout for sale in DFW area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smonty · 06-06-2005, 10:57 AM

If anyone needs a decent 67 SWB Stepside bed I have one for sale for $500.00 in the DFW area. Wood floor is gone but has all crossmembers and strips if you want to restore them. After market is probably the way to go though. The driver's fender does not have the cutout for the tire. Fairly rare one year item.

Link to Pics: http://egismant.photosite.com/Album2/

**72ironmike** · 06-06-2005, 08:45 PM

Any steel short wide boxes or floors for sale? You've been gone awhile haven't you?

smonty · 06-07-2005, 01:47 AM

I have been busy and just started looking for trucks again. I will keep an eye out for SWB fleetside beds and floors.

**72ironmike** · 06-07-2005, 06:43 AM

Thanks. Let me know. Good to have you back.

**67 cst swb** · 06-07-2005, 12:02 PM

Smonty...
You have any pics of bed? I'm thinking of assembling a 68 short bed I have as a stepside. It would just be a driver so I was going to use a pair of '67 front fenders I already have. Is this bed repairable to driver quality?

smonty · 06-07-2005, 12:22 PM

This is a very solid and complete bed w/no tailgate. There are a few minor dings on the fenders but this would be a very nice bed with very little work. If you are going to use the original metal strips that go between the wood slats you can use these but one of them is bent and you will have to straighten or replace it. Please PM me your email address and I will get you some pictures.

smonty · 06-13-2005, 12:50 PM

Added link to pictures.

**special-K** · 06-14-2005, 06:51 AM

It won`t link.Could you e-mail to ckryder@hotmail.com?

**special-K** · 06-14-2005, 07:02 AM

I found your link.Is shipping possible,whole or parted?Maybe fenders off and in bed on pallet?I`m building a`67 GMC and have a`69 bed/fenders.My zip is 21771 if you want to check into it.

smonty · 06-16-2005, 10:50 AM

I really do not have time to ship this bed. I can drop it off at a shipper but that is about all I have time for shipping wise.

**special-K** · 06-21-2005, 08:23 AM

So you can ship?It would just cost more for crating?Or,are you saying I need to locate a shipper and make all arrangements?Maybe we could get someone in DFW to help with removing fenders.I think this should be done to protect fenders and reduce size.

smonty · 06-21-2005, 11:02 AM

I will take the fenders off and put the bed on a large pallet and take it to a local shipper for an additional $50.00. It will have to be trucked to you. I think this bed only weighs around 250-300 lbs so it may not be too expensive to ship. The shipping zip code is 75222 if you want to check on prices. I find that ABF freight is the most reasonable but you can check around.

**special-K** · 06-21-2005, 07:26 PM

That sounds reasonable enough.Let me check on freight and I`ll get back to ya.

**special-K** · 06-22-2005, 06:42 AM

I must have done something wrong.I got a quote from ABF online of $823.That was just based on 300#.The first quote,I gave dimensions of 6x5x3 and the cost was $1,800.These were with you dropping off and me picking uo at the terminal.Could you give it a shot for me?

**special-K** · 06-22-2005, 10:47 AM

I talked to someone at ABF and got it"down"to $513.00,still checking.

smonty · 06-22-2005, 12:35 PM

OK. Just let me know.

Ernie

smonty · 06-23-2005, 10:11 AM

To the top

06-06-2005, 10:57 AM	#1
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	67 SWB Stepside Bed W/No cutout for sale in DFW area If anyone needs a decent 67 SWB Stepside bed I have one for sale for $500.00 in the DFW area. Wood floor is gone but has all crossmembers and strips if you want to restore them. After market is probably the way to go though. The driver's fender does not have the cutout for the tire. Fairly rare one year item. Link to Pics: http://egismant.photosite.com/Album2/ __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project Last edited by smonty; 06-13-2005 at 12:49 PM.

06-06-2005, 08:45 PM	#2
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,060	Bed Floor Any steel short wide boxes or floors for sale? You've been gone awhile haven't you?

06-07-2005, 01:47 AM	#3
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to 72ironmike I have been busy and just started looking for trucks again. I will keep an eye out for SWB fleetside beds and floors. __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

06-07-2005, 06:43 AM	#4
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,060	Beds Thanks. Let me know. Good to have you back.

06-07-2005, 12:02 PM	#5
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	pics... Smonty... You have any pics of bed? I'm thinking of assembling a 68 short bed I have as a stepside. It would just be a driver so I was going to use a pair of '67 front fenders I already have. Is this bed repairable to driver quality? __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

06-07-2005, 12:22 PM	#6
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to 67 cst swb This is a very solid and complete bed w/no tailgate. There are a few minor dings on the fenders but this would be a very nice bed with very little work. If you are going to use the original metal strips that go between the wood slats you can use these but one of them is bent and you will have to straighten or replace it. Please PM me your email address and I will get you some pictures. __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

06-13-2005, 12:50 PM	#7
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Pictures Added link to pictures. __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

06-14-2005, 06:51 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	It won`t link.Could you e-mail to ckryder@hotmail.com? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-14-2005, 07:02 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	I found your link.Is shipping possible,whole or parted?Maybe fenders off and in bed on pallet?I`m building a`67 GMC and have a`69 bed/fenders.My zip is 21771 if you want to check into it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-16-2005, 10:50 AM	#10
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to special-K I really do not have time to ship this bed. I can drop it off at a shipper but that is about all I have time for shipping wise. __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

06-21-2005, 08:23 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	So you can ship?It would just cost more for crating?Or,are you saying I need to locate a shipper and make all arrangements?Maybe we could get someone in DFW to help with removing fenders.I think this should be done to protect fenders and reduce size. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-21-2005, 11:02 AM	#12
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to special-K I will take the fenders off and put the bed on a large pallet and take it to a local shipper for an additional $50.00. It will have to be trucked to you. I think this bed only weighs around 250-300 lbs so it may not be too expensive to ship. The shipping zip code is 75222 if you want to check on prices. I find that ABF freight is the most reasonable but you can check around. __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

06-21-2005, 07:26 PM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	That sounds reasonable enough.Let me check on freight and I`ll get back to ya. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-22-2005, 06:42 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	I must have done something wrong.I got a quote from ABF online of $823.That was just based on 300#.The first quote,I gave dimensions of 6x5x3 and the cost was $1,800.These were with you dropping off and me picking uo at the terminal.Could you give it a shot for me? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-22-2005, 10:47 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	I talked to someone at ABF and got it"down"to $513.00,still checking. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

06-22-2005, 12:35 PM	#16
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply to special-k OK. Just let me know. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

06-23-2005, 10:11 AM	#17
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	To The TOP To the top __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.