parts needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MJN** · 07-08-2002, 12:02 AM

Looking for '74 woodgrain dash bezel for A/C and the dash pad inlay with woodgrain and must have air vents. I would also like to find a chrome original air cleaner lid for a '76 vette w/ dual snorkel base, it is the same as a truck lid but chrome. Thanks

BigBlockBurris · 07-15-2002, 08:51 PM

I have a nice wwodgrain dash panel out of a 75. Is it the same as a 74? What other piece do you need? This stuff is out of a ambulance so it is in real nice shape. Let me know.

BBB

**MJN** · 07-19-2002, 10:37 AM

Thwy will interchange. I also need the part in the dash pad with the vents and the little emblem in it. As long as they are for A/c then I'll take them. Thanks

**MJN** · 08-08-2002, 10:40 PM

Anyone know where you can get good hinges? Or rebuilt? Will be painting soon and need upper and lower door hinges for the '74. Thanks

**crossy** · 08-08-2002, 11:20 PM

do you need all 4 ? it is not common for the bottom ones to go ,but I think I saved a set of 4 off a low mileage 79 I parted let me know at all4trux@snip.net .DAVE

**MJN** · 08-09-2002, 10:02 PM

Yeah I need all four, just might as well replace them all, before it gets painted. How much ya want for 'em?

07-08-2002, 12:02 AM	#1
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 2,998	parts needed Looking for '74 woodgrain dash bezel for A/C and the dash pad inlay with woodgrain and must have air vents. I would also like to find a chrome original air cleaner lid for a '76 vette w/ dual snorkel base, it is the same as a truck lid but chrome. Thanks Last edited by MJN; 07-16-2002 at 10:41 AM.

08-08-2002, 11:20 PM	#5
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	hinges do you need all 4 ? it is not common for the bottom ones to go ,but I think I saved a set of 4 off a low mileage 79 I parted let me know at all4trux@snip.net .DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-15-2002, 08:51 PM	#2
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	I have a nice wwodgrain dash panel out of a 75. Is it the same as a 74? What other piece do you need? This stuff is out of a ambulance so it is in real nice shape. Let me know. BBB

07-19-2002, 10:37 AM	#3
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 2,998	Thwy will interchange. I also need the part in the dash pad with the vents and the little emblem in it. As long as they are for A/c then I'll take them. Thanks

08-08-2002, 10:40 PM	#4
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 2,998	Anyone know where you can get good hinges? Or rebuilt? Will be painting soon and need upper and lower door hinges for the '74. Thanks

08-09-2002, 10:02 PM	#6
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 2,998	Yeah I need all four, just might as well replace them all, before it gets painted. How much ya want for 'em?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.