Need shock 11" comp. 18" extended, rear bagged - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged72blaz · 06-19-2005, 10:41 PM

I have a CCP notch, with firestone bags, and Early Classic shock relocators, I'm getting ready to put Slammed Specialty bags on the rear which will require a shock that will compress to under 12" and extended more, to around 18" Right now my shocks compress to 12" and are compressed completely air out. I'm going to remove the bumpstops in the notch, and put 1/4" thick ones in.

I could change the angle of the shocks but this is a last resort.

72MARIO · 06-20-2005, 05:28 PM

Check out CPP.

BigMac · 06-22-2005, 04:24 PM

I am looking at an ad in a truck mag for AIM Industries and it shows all different compressed and extended sizes. 1-800-289-9980 They show sizes starting at 8x14, 9x17, 11x19 etc. www.truckin.com is one of their sites. Good luck!

TheFabShop · 07-01-2005, 11:49 PM

Go to your parts store and look at a monroe book. I forget the part# but they have what you are looking for in the book.

06-19-2005, 10:41 PM	#1
bagged72blaz Got L.E.D.s Join Date: Dec 2004 Location: Craig Co. Posts: 195	Need shocks 11" comp. 18" extended, rear bagged I have a CCP notch, with firestone bags, and Early Classic shock relocators, I'm getting ready to put Slammed Specialty bags on the rear which will require a shock that will compress to under 12" and extended more, to around 18" Right now my shocks compress to 12" and are compressed completely air out. I'm going to remove the bumpstops in the notch, and put 1/4" thick ones in. I could change the angle of the shocks but this is a last resort. __________________ Bagged 1972 2wd Blazer http://www.earlyclassic.com/home.aspx Last edited by bagged72blaz; 06-19-2005 at 10:42 PM.

06-20-2005, 05:28 PM	#2
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Check out CPP. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

06-22-2005, 04:24 PM	#3
BigMac Registered User Join Date: May 2005 Location: Denver, North Carolina Posts: 4	I am looking at an ad in a truck mag for AIM Industries and it shows all different compressed and extended sizes. 1-800-289-9980 They show sizes starting at 8x14, 9x17, 11x19 etc. www.truckin.com is one of their sites. Good luck! Last edited by BigMac; 06-22-2005 at 04:26 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-01-2005, 11:49 PM	#4
TheFabShop Registered User Join Date: Oct 2004 Posts: 67	Go to your parts store and look at a monroe book. I forget the part# but they have what you are looking for in the book.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.