New style center caps for duallys.$50 shipped - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*bisquik65* · 06-24-2005, 04:54 PM

I have a few sets of new ,never installed dually center caps for duallys. They look great on an older truck. All you need is the new 9/16 or 1/2 conversion lug nuts with the outside threads to install them... Just let me know,I have 3 sets,mabye more here that need to go....Thanks,Erick
Simulaters get old after a while,every truck has them,make it look good with these and 16 inch trim rings.....

LUV2XCLR8 · 06-24-2005, 05:02 PM

Hey Erick, got my skid plate today, box was demolished and open, but it was all there

*bisquik65* · 06-24-2005, 05:07 PM

I dont think they could have damaged it,do you?

That is heavy!!!Let all know if it works...with the stock driveshaft..

86SILVERADO · 06-24-2005, 06:12 PM

Hey Erick, I will take a set. How do you want payment?

72gord · 06-24-2005, 06:44 PM

Hey Erick, could you measure the inside diameter and depth of the rear caps, interested if they will clear my rear hubs. Thanks, Gord

*bisquik65* · 06-24-2005, 07:43 PM

Quote:

Originally Posted by 86SILVERADO

Hey Erick, I will take a set. How do you want payment?

PM sent

*bisquik65* · 06-24-2005, 07:48 PM

Quote:

Originally Posted by 72gord

Hey Erick, could you measure the inside diameter and depth of the rear caps, interested if they will clear my rear hubs. Thanks, Gord

The hole on the rear cap is 4 1/2 inches wide by 4 inches deep....These are 88-2001 style ones you dont need to trim anything off of,
These are 2002-2005 style on my 81 wrecker,trimming was required...

72gord · 06-25-2005, 08:39 AM

I'll do some measuring and get back to you. Gord

*bisquik65* · 06-25-2005, 08:50 AM

What i did with my 70 blazer 4x4,I put 69 K/20 rears under it,took 4 rear dually caps and they bolt on perfect with 1/2 threaded lugs...simple and look great...I will get pics of that too.... Let me know,Thanks,Erick

cheyenne10 · 06-25-2005, 11:42 AM

I think I need a pair of the rear 1 ton centers to cover my axle ends. I am using the newer HD2500 alloy rims. The caps with them fit the front but rears are not deep enough. I need the ones with the gold bowtie and silvber background not the black background. Just 2 rear caps and shipping to zip 97401. Email me at cheyennek20@comcast.net

72gord · 06-25-2005, 12:50 PM

I'm doing the same as Bob....68 rear, dana 60 with 02 alloy wheels if these caps will work for that I'll take em let me know with shipping to 54639. Thanks Gord

*bisquik65* · 06-25-2005, 08:10 PM

I dont have any more of the 2002-05 style right now,i am working on getting some. I will let you know.Thanks,Erick

72gord · 06-25-2005, 09:44 PM

Thanks, keep me in mind...Gord

72gord · 06-25-2005, 10:00 PM

BTW...what is the difference between the 02 and up and the 01 and older?

*bisquik65* · 06-25-2005, 10:46 PM

Quote:

Originally Posted by 72gord

BTW...what is the difference between the 02 and up and the 01 and older?

The ones on my wrecker are 2002 -up the black lug caps are made on the cap. the 88-01 style take the black lugs that are seperate, and the shape is a little different...and you need to trim the rear of the newer ones to fit older wheels.like the 81 wrecker has on it...They keep changing stuff all the time

but they look better than simulators!!anyday...Thanks,Erick

*bisquik65* · 06-26-2005, 08:53 AM

I have one set of the 88-01 style left...sold 2 sets... Thanks,Erick

*bisquik65* · 06-27-2005, 03:19 PM

I have 1 set of 02-05 style right now,$50 shipped also...Here they are,not chrome but painted silver...nice...

**70STOVEBOLT** · 06-28-2005, 01:49 PM

Ever get any 1/2 ton 6 hole 2wd?

*bisquik65* · 06-28-2005, 07:40 PM

Quote:

Originally Posted by 70STOVEBOLT

Ever get any 1/2 ton 6 hole 2wd?

Not currently but will have some soon.Thanks,Erick

rwgregory · 06-29-2005, 03:30 AM

Would you have any either new or old style for a GMC??
rwgregory

*bisquik65* · 06-29-2005, 11:51 AM

Quote:

Originally Posted by rwgregory

Would you have any either new or old style for a GMC??
rwgregory

I have one gmc set for my truck right now And more coming in soon.Thanks,Erick

rwgregory · 06-30-2005, 01:09 AM

Erick,
When you get a GMC set you want to sell, I'll take them. Either PM me or post it here.
Thanx,
rwgregory

*bisquik65* · 07-01-2005, 05:30 PM

02-up GMC set here they are

*bisquik65* · 07-02-2005, 07:18 AM

02-up GMC caps are sold.Thanks,Erick

06-24-2005, 04:54 PM	#1
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	New style center caps for duallys.$50 shipped I have a few sets of new ,never installed dually center caps for duallys. They look great on an older truck. All you need is the new 9/16 or 1/2 conversion lug nuts with the outside threads to install them... Just let me know,I have 3 sets,mabye more here that need to go....Thanks,Erick Simulaters get old after a while,every truck has them,make it look good with these and 16 inch trim rings..... Attached Images Last edited by bisquik65; 06-24-2005 at 04:56 PM.

06-24-2005, 05:02 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Hey Erick, got my skid plate today, box was demolished and open, but it was all there __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

06-24-2005, 06:12 PM	#4
86SILVERADO Registered User Join Date: Dec 2002 Location: Hills of Western Mass Posts: 626	Hey Erick, I will take a set. How do you want payment? __________________ 86 Silverado C10 back to 305 power! 67 C30 Dually Dump, with 350 transplant, Rockhauler 05 Duramax 3500 "If at first you don't succeed, try a bigger hammer" Member of the 1-Ton club!

06-25-2005, 11:42 AM	#10
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	rear caps I think I need a pair of the rear 1 ton centers to cover my axle ends. I am using the newer HD2500 alloy rims. The caps with them fit the front but rears are not deep enough. I need the ones with the gold bowtie and silvber background not the black background. Just 2 rear caps and shipping to zip 97401. Email me at cheyennek20@comcast.net __________________ Bob

06-27-2005, 03:19 PM	#17
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I have 1 set of 02-05 style right now,$50 shipped also...Here they are,not chrome but painted silver...nice... Attached Images

06-24-2005, 05:07 PM	#3
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I dont think they could have damaged it,do you? That is heavy!!!Let all know if it works...with the stock driveshaft..

06-24-2005, 06:44 PM	#5
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 601	Hey Erick, could you measure the inside diameter and depth of the rear caps, interested if they will clear my rear hubs. Thanks, Gord

06-25-2005, 08:39 AM	#8
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 601	I'll do some measuring and get back to you. Gord

06-25-2005, 08:50 AM	#9
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	What i did with my 70 blazer 4x4,I put 69 K/20 rears under it,took 4 rear dually caps and they bolt on perfect with 1/2 threaded lugs...simple and look great...I will get pics of that too.... Let me know,Thanks,Erick

06-25-2005, 12:50 PM	#11
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 601	I'm doing the same as Bob....68 rear, dana 60 with 02 alloy wheels if these caps will work for that I'll take em let me know with shipping to 54639. Thanks Gord

06-25-2005, 08:10 PM	#12
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I dont have any more of the 2002-05 style right now,i am working on getting some. I will let you know.Thanks,Erick

06-25-2005, 09:44 PM	#13
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 601	Thanks, keep me in mind...Gord

06-25-2005, 10:00 PM	#14
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 601	BTW...what is the difference between the 02 and up and the 01 and older?

06-26-2005, 08:53 AM	#16
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I have one set of the 88-01 style left...sold 2 sets... Thanks,Erick

06-28-2005, 01:49 PM	#18
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Ever get any 1/2 ton 6 hole 2wd?



Register or Log In To remove these advertisements.

06-29-2005, 03:30 AM	#20
rwgregory Registered User Join Date: Apr 2005 Location: Chula Vista, California Posts: 495	Would you have any either new or old style for a GMC?? rwgregory __________________ rwgregory 67 GMC 2500 ,2w/d wide box 305 V-6, 4-speed

06-30-2005, 01:09 AM	#22
rwgregory Registered User Join Date: Apr 2005 Location: Chula Vista, California Posts: 495	Erick, When you get a GMC set you want to sell, I'll take them. Either PM me or post it here. Thanx, rwgregory __________________ rwgregory 67 GMC 2500 ,2w/d wide box 305 V-6, 4-speed

07-01-2005, 05:30 PM	#23
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	02-up GMC set here they are Attached Images

07-02-2005, 07:18 AM	#24
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	02-up GMC caps are sold.Thanks,Erick

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.