07-14-2005, 05:37 PM | #1 |
Registered User
Join Date: Jul 2005
Location: nebraska
Posts: 24
|
tire size/gear ratio
I was looking at a 1998 chevy 4x4 truck, with 3.73 gears and a posi rear end.
If i get this truck i want to put a 6 inch lift on it with 35 inch tires. Would 3.73 gears handle 35 inch tires, and would you have much power to the rear wheels? |
07-14-2005, 06:56 PM | #2 |
user # 2756
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
I'd say go at least 4.10s. I have 35s w/ 4.10s and 4.56s, no OD but the 4.10s seem best all around.
Welcome to the board!
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm Last edited by JIMs70GMC; 07-14-2005 at 06:56 PM. |
07-14-2005, 07:15 PM | #3 |
Certified Chevy Man
Join Date: Jan 2000
Location: Tucson, Arizona, United States
Posts: 2,053
|
I know quite a few people running those year Chevy's with 6" lifts and 35's with the 3.73 gears. They say it runs really well. But if you're gonna tow alot, wheel alot, or do lots and lots of city driving 4.10 or 4.56 gears would be better. If you drive alot on the highway, stick with the 3.73's and they'll work fine.
__________________
68 Chevy CST (327,TH400) 3/5 drop lots of fun stuff 71 Suburban 4x4 (350,TH350) 7" lift 37's, D44/14 bolt and other sorts of goodies, lockers front and rear, flexes 40", 895 RTI score Check out my web site!!! http://www.geocities.com/cst68chevy/ |
07-14-2005, 07:19 PM | #4 |
Account Suspended
Join Date: Jul 2005
Location: "Golden Horshoe", Ontario
Posts: 6
|
Is the truck a good deal? I agree 4.10 would be a nice gear for 35's but 3.73's probably wouldn't be very annoying.
(I've seen a lot of 4x4's with 33's and lame 3.08 gears and that truck would still be better.) Since it's almost always cheaper to buy a truck with the gears you like, try finding one with the 4.10's. |
07-14-2005, 10:56 PM | #5 |
Registered User
Join Date: Jul 2005
Location: nebraska
Posts: 24
|
the guy wants $9000/obo for the truck, and it is a pretty decent truck. It has a towing package and a 350 vortex. Changing the gears would cost more money, thats why i wondered if you could run 35 inch tires on them. Thanks for the input
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|