tweeters placement? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fossilrunner · 07-17-2005, 02:10 PM

where are you guys mounting your tweeters?

sdkid · 07-17-2005, 02:36 PM

I'm not that far. I do seem to remember a thread where the guy put them in an old set of a/c vents. They looked pretty good.

Edmond · 07-17-2005, 03:16 PM

Quote:

Originally Posted by sdkid

I'm not that far. I do seem to remember a thread where the guy put them in an old set of a/c vents. They looked pretty good.

I have them in that location. Works great.

Cya,
Edmond

355 · 07-17-2005, 07:22 PM

The best location is somewhere on the upper dash so the sound will bounce off the wind shield. I should have mounted mine there when I had the windshield out, but I didn't. Mine are mounted at the far sides of the front of the dash where the factory AC balls go. When you get them in, and if you have 'Stranglehold by Ted Nugent', play it and if the highs sort of rip thru your head you have them in the right place. Do not hook them up straight, you have to have an inline capacitor, maybe resistor, as a filter to cut out all the other frequencies, mine were built in the wiring. Have fun, Steve

70 shorty · 07-17-2005, 07:40 PM

I've seen a guy mount them in functional A/C vents in a new Chevy truck, just food for thought, I don't really have any ideas, I've just got 2 6x9's under the seat in mine.

speedracer · 07-17-2005, 10:51 PM

put mine in the upper corner or the roof next to the visor mount looks and sounds great!

Mudder · 07-18-2005, 07:12 AM

Mine are down in the corners of the dash. Not really noticed there.

mocwon · 07-18-2005, 08:58 AM

Installed the Rod Doors tweeters that are made into the a-pillar trim. Look nice and sound good.

sdkid · 07-18-2005, 11:38 PM

Quote:

Originally Posted by mocwon

Installed the Rod Doors tweeters that are made into the a-pillar trim. Look nice and sound good.

I would like to see a pic of those.

07-17-2005, 02:10 PM	#1
fossilrunner Registered User Join Date: Feb 2004 Location: FORT WORTH, TX Posts: 225	tweeters placement? where are you guys mounting your tweeters? __________________ 71 chevy lwb w/ 350,750 holley 4150,edelbrock performer rpm,full 2 1/2 exhaust exit out side,6-8 drop,rally wheels.-SOLD 74 Chevy nova-355 with a little nitrous 78 GMC Jimmy 4x4-Factory 400 and all stock.

07-17-2005, 02:36 PM	#2
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	I'm not that far. I do seem to remember a thread where the guy put them in an old set of a/c vents. They looked pretty good. __________________ I think the world needs a drink... Help somebody...If you can....VanZant We're not wrong, we're not sorry, and its probably gonna happen again. That's the truth about men. Tracy Byrd Member# 13924 '70 c10, 350/350 '68 c10 250/4spd '68 c10 no eng/trans fac ps/pb/ac/at (future father/sons project) '48 Chevy Loadmaster

07-17-2005, 07:22 PM	#4
355 Registered User Join Date: May 2005 Location: South Mississippi Posts: 81	The best location is somewhere on the upper dash so the sound will bounce off the wind shield. I should have mounted mine there when I had the windshield out, but I didn't. Mine are mounted at the far sides of the front of the dash where the factory AC balls go. When you get them in, and if you have 'Stranglehold by Ted Nugent', play it and if the highs sort of rip thru your head you have them in the right place. Do not hook them up straight, you have to have an inline capacitor, maybe resistor, as a filter to cut out all the other frequencies, mine were built in the wiring. Have fun, Steve __________________ 1969 C10 Long Step,355,700r4w/lockup, HEI,Weiand,750 Performer,1.6 rockers,Camel Humps,Comp 262Extreme,Hedman,2 1/2"pipes, tele/tilt,SunRoof,ps,Disc pb,ac,Cragar,eaton,Corvette style roll pan, Bowtie louvered tail gate,lowered 2/2.

07-17-2005, 07:40 PM	#5
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	I've seen a guy mount them in functional A/C vents in a new Chevy truck, just food for thought, I don't really have any ideas, I've just got 2 6x9's under the seat in mine. __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

07-17-2005, 10:51 PM	#6
speedracer Blank Join Date: May 2005 Location: Southington, CT Posts: 221	put mine in the upper corner or the roof next to the visor mount looks and sounds great! __________________ 1969 lwb 4/6 drop 17x8-18x10 torque thrust II's 327-420hp 2004R 3.73 posi. 1977 Corvette 350-375hp 4speed, silver show car. 2002 S10 xtreme, work truck 2004.5 VW jetta GLI 1.8T 6speed, weekend warrior. 2013 Audi A3 TDI, the wife's car

07-18-2005, 07:12 AM	#7
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Mine are down in the corners of the dash. Not really noticed there. Attached Images Last edited by Mudder; 07-18-2005 at 07:13 AM.

07-18-2005, 08:58 AM	#8
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	Installed the Rod Doors tweeters that are made into the a-pillar trim. Look nice and sound good. __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.