Power windows problems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Clos'84TX · 07-20-2005, 01:39 AM

Hey guys, I've got a question.....I know what you're thinking again asking for advise.

Okay here goes, my passenger side (power) window will not go down all the way. It stops about 1/3 of the way down and makes a God awful clicking noise. Is this a motor prob? or a regulator prob?....

I have taken apart the door and pushed the window all the way down. but I have to pull it up to the "bad" clickin part just close my window.

some help please?

86 GMG · 07-20-2005, 08:59 AM

I Wouls Say It Is The Regulator If The Motor Is Working But The Window Is Not Going Up Or Down

*gn4u2c* · 07-20-2005, 09:12 AM

yep reg been there done that

hotrodhomi · 07-20-2005, 04:43 PM

you need to yank them both out to replace either of them.

07-20-2005, 01:39 AM	#1
Clos'84TX Foom, foom, foom! Join Date: Mar 2005 Location: Abilene, TX Posts: 106	Power windows problems Hey guys, I've got a question.....I know what you're thinking again asking for advise. Okay here goes, my passenger side (power) window will not go down all the way. It stops about 1/3 of the way down and makes a God awful clicking noise. Is this a motor prob? or a regulator prob?.... I have taken apart the door and pushed the window all the way down. but I have to pull it up to the "bad" clickin part just close my window. some help please? __________________ - Dan 84' LWB C10 // 2.5" from collector back. duel Turbo Mufflers // 350 w/ TH350 long Headers//3.73 rearend gears Future Mods *3/4 suspension drop* Last edited by Clos'84TX; 07-20-2005 at 06:54 AM.

07-20-2005, 08:59 AM	#2
86 GMG Registered User Join Date: Apr 2005 Location: Tulsa Oklahoma Posts: 943	I Wouls Say It Is The Regulator If The Motor Is Working But The Window Is Not Going Up Or Down __________________ square body trucks an addiction or an investment either way they consume all my extra time and money

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-20-2005, 09:12 AM	#3
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	yep reg been there done that

07-20-2005, 04:43 PM	#4
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	you need to yank them both out to replace either of them.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.