My shortbed has no balls - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 07-21-2005, 09:23 AM

I swapped-in a hot V8 and Muncie M22 and it has 4.11 gears.I thought this would make it bad-a55,but now I realize after reading other threads,it still has no balls!If I go with Vintage Air,they have such little balls compared to the big balls the factory used.I`m not impressed with the little balls,they don`t look right.I guess performance and not looks is the main concern when considering balls.But,you do see the balls right in front of you when driving(as well as the significant other).I wouldn`t want her making comments about the small size of my balls as we drive along.I`ve seen people use the bigger balls on the modern systems giving the original looks.I guess I`ve been looking at these balls for so many years they just look right.I`m looking for a set of factory balls,as well as the cups that hold them.I figured this would be a good time to ask since the other threads on balls have people digging through and looking at their balls.

55454 · 07-21-2005, 09:30 AM

If you need a set of balls I will give you some they are not perfect and have some age but they will work. Do you need the housing also free with shipping, I am sending out two other free packages tomarrow if you want them pm your address and I will send them, hurry up last of the free parts for a while.

Tommy

Putter · 07-21-2005, 10:03 AM

55454,
I PM'd you about your balls. They sound....n i c e!!!!!

Who needs PERFECT balls anyway!!!

70c10 · 07-21-2005, 11:06 AM

You need these brass balls,LOL: http://cgi.ebay.com/ws/eBayISAPI.dll...&tc=photo&rd=1

mocwon · 07-21-2005, 11:43 AM

Vintage Air has factory size balls too but hey don't have the adapter to attach them to the hose. That's what I got since I didn't want undersized balls either.

**special-K** · 07-22-2005, 05:43 AM

I`ll have to call WES for the big ball adapters.

07-21-2005, 09:23 AM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	My shortbed has no balls I swapped-in a hot V8 and Muncie M22 and it has 4.11 gears.I thought this would make it bad-a55,but now I realize after reading other threads,it still has no balls!If I go with Vintage Air,they have such little balls compared to the big balls the factory used.I`m not impressed with the little balls,they don`t look right.I guess performance and not looks is the main concern when considering balls.But,you do see the balls right in front of you when driving(as well as the significant other).I wouldn`t want her making comments about the small size of my balls as we drive along.I`ve seen people use the bigger balls on the modern systems giving the original looks.I guess I`ve been looking at these balls for so many years they just look right.I`m looking for a set of factory balls,as well as the cups that hold them.I figured this would be a good time to ask since the other threads on balls have people digging through and looking at their balls. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 07-21-2005 at 09:28 AM.

07-21-2005, 10:03 AM	#3
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	55454, I PM'd you about your balls. They sound....n i c e!!!!! Who needs PERFECT balls anyway!!! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 07-21-2005 at 10:04 AM.

07-21-2005, 11:06 AM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	You need these brass balls,LOL: http://cgi.ebay.com/ws/eBayISAPI.dll...&tc=photo&rd=1 __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

07-21-2005, 11:43 AM	#5
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	Vintage Air has factory size balls too but hey don't have the adapter to attach them to the hose. That's what I got since I didn't want undersized balls either. __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

07-22-2005, 05:43 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	I`ll have to call WES for the big ball adapters. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-21-2005, 09:30 AM	#2
55454 55454 Join Date: Mar 2005 Location: Lafayette La. Posts: 340	If you need a set of balls I will give you some they are not perfect and have some age but they will work. Do you need the housing also free with shipping, I am sending out two other free packages tomarrow if you want them pm your address and I will send them, hurry up last of the free parts for a while. Tommy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.