Factory 4 speeds and 4X4's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**dennislbrooks** · 07-31-2005, 06:13 PM

If you have to ask what this is, you probably do not need it.

Turns freely, shifts in/out. Has forward, neutral, and reverse.

Arrow Gear Co. Model # SHC7 2B s/n 3070114

$100 and ride --if you are not pleased with it, you return it with the ride and I will refund the $100. About 30 to 35 lbs to zip 75022.

LUV2XCLR8 · 07-31-2005, 06:25 PM

Good Price

**JIMs70GMC** · 07-31-2005, 08:39 PM

What tranny does it fit?

**dennislbrooks** · 07-31-2005, 08:54 PM

If you have the 6 bolt PTO cover on your 4 speed or the 4x4 transfer case, there is a very good chance it will fit.

**JIMs70GMC** · 07-31-2005, 09:02 PM

Unfortunately there where 3 different 4spds in the 4wds, and all three have different drive gears for the ptos. I have one in my garage now that is for a NP435, both my trucks have sm465s and it will not fit. And then theirs the sm420. The NP205 has a different drive gear also. let me research this.

**dennislbrooks** · 07-31-2005, 09:16 PM

23 teeth and the top gear tooth is approx 1.25" from the case mount

thanks

**special-K** · 08-01-2005, 07:02 AM

So,do you have any idea what vehicle it was in?If you do,it would help narrow it down.I have a`72 that I want a pto for to mount to the NP205 t-case.Do you know if it was tranny or t-case mounted?

**dennislbrooks** · 08-01-2005, 12:51 PM

Sorry, do not know if it was off a tranny or transfer case.

**dennislbrooks** · 08-05-2005, 10:02 AM

I found that Arrow Gear Co. was bought by Sack Bros Co in Nebraska. I was surprised but he told me that this Model SHC7 was made for the GM 420 4 speed trans from 48-67.

**special-K** · 08-05-2005, 07:15 PM

There ya go!Unfortunately,now I know I can`t use it.But,at least there`ll be someone,now that you have the application nailed down.

07-31-2005, 06:13 PM	#1
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,787	Factory 4 speeds and 4X4's -- PTO If you have to ask what this is, you probably do not need it. Turns freely, shifts in/out. Has forward, neutral, and reverse. Arrow Gear Co. Model # SHC7 2B s/n 3070114 $100 and ride --if you are not pleased with it, you return it with the ride and I will refund the $100. About 30 to 35 lbs to zip 75022. Attached Images Last edited by dennislbrooks; 07-31-2005 at 07:33 PM. Reason: added clarification

07-31-2005, 06:25 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Good Price __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-31-2005, 08:39 PM	#3
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	What tranny does it fit? __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

07-31-2005, 09:02 PM	#5
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Unfortunately there where 3 different 4spds in the 4wds, and all three have different drive gears for the ptos. I have one in my garage now that is for a NP435, both my trucks have sm465s and it will not fit. And then theirs the sm420. The NP205 has a different drive gear also. let me research this. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

07-31-2005, 09:16 PM	#6
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,787	some info 23 teeth and the top gear tooth is approx 1.25" from the case mount thanks Last edited by dennislbrooks; 07-31-2005 at 09:30 PM. Reason: added info

07-31-2005, 08:54 PM	#4
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,787	If you have the 6 bolt PTO cover on your 4 speed or the 4x4 transfer case, there is a very good chance it will fit.

08-01-2005, 07:02 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	So,do you have any idea what vehicle it was in?If you do,it would help narrow it down.I have a`72 that I want a pto for to mount to the NP205 t-case.Do you know if it was tranny or t-case mounted? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-01-2005, 12:51 PM	#8
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,787	Sorry, do not know if it was off a tranny or transfer case.

08-05-2005, 10:02 AM	#9
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,787	more info I found that Arrow Gear Co. was bought by Sack Bros Co in Nebraska. I was surprised but he told me that this Model SHC7 was made for the GM 420 4 speed trans from 48-67.

08-05-2005, 07:15 PM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	There ya go!Unfortunately,now I know I can`t use it.But,at least there`ll be someone,now that you have the application nailed down. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.