???Exhaust Manifolds for 72 c20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ssjones · 08-08-2005, 03:41 PM

I am going to get my exhaust done by a local shop. They are good in the valley and are recommending the corvette style ram horn exhaust with a center dump on the passenger side. Any suggestions for locating these? Part #'s, etc... This would be for a 350.

Thanks.

tomatocity · 08-08-2005, 06:17 PM

http://www.crateenginedepot.com/stor...1-P619C23.aspx

http://www.1aauto.com/1A/ExhaustMani...EM00168/270046

http://www.1aauto.com/1A/ExhaustMani...EM00169/287615

IA Auto sounds good at $200+. Check and see if the studs and bolts are included.

tomatocity · 08-08-2005, 07:09 PM

http://www.ecklers.com/product.asp?d...VG5X82TCQL9HNE

http://www.ecklers.com/product.asp?d...VG5X82TCQL9HNE

http://www.ecklers.com/dept.asp?dept...VG5X82TCQL9HNE

Here is another source. More expensive but no grinding.

I started a thread about these exhaust manifolds awhile back and I lost all my links (no not a bad harddrive just a stupid user). Can someone point me at the exhaust threads. Thanks.

08-08-2005, 03:41 PM	#1
ssjones Registered User Join Date: Mar 2005 Location: Scottsdale, Arizona Posts: 98	???Exhaust Manifolds for 72 c20 I am going to get my exhaust done by a local shop. They are good in the valley and are recommending the corvette style ram horn exhaust with a center dump on the passenger side. Any suggestions for locating these? Part #'s, etc... This would be for a 350. Thanks. __________________ 1972 Chevy Cheyenne 20 1979 Chevy Camaro 2007 Chevy Avalanche 2005 Mini Cooper

08-08-2005, 06:17 PM	#2
tomatocity Registered User Join Date: Jun 2005 Location: Sacramento CA Posts: 1,255	http://www.crateenginedepot.com/stor...1-P619C23.aspx http://www.1aauto.com/1A/ExhaustMani...EM00168/270046 http://www.1aauto.com/1A/ExhaustMani...EM00169/287615 IA Auto sounds good at $200+. Check and see if the studs and bolts are included. __________________ Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck.

08-08-2005, 07:09 PM	#3
tomatocity Registered User Join Date: Jun 2005 Location: Sacramento CA Posts: 1,255	http://www.ecklers.com/product.asp?d...VG5X82TCQL9HNE http://www.ecklers.com/product.asp?d...VG5X82TCQL9HNE http://www.ecklers.com/dept.asp?dept...VG5X82TCQL9HNE Here is another source. More expensive but no grinding. I started a thread about these exhaust manifolds awhile back and I lost all my links (no not a bad harddrive just a stupid user). Can someone point me at the exhaust threads. Thanks. __________________ Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.