![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: May 2000
Location: Fort Mill, SC
Posts: 71
|
![]()
I just installed my blazer tank into my C10. My filler neck has a vent hose that attaches to the vent hose on the tank by the main filler neck. There are two smaller vent tubes which I connected to the Charcoal cansister which I mounted next to the tank in the back. The problem is the smell of raw gas is coming from the charcoal canister, as it is the open vent. Is there a better way to get rid of the smell, such as capping off the two small vent tubes or something else to use in place of the canister. Thanks for your help.
__________________
Kenny |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2002
Location: Knoxville Tenn.
Posts: 3,058
|
Cap off the small tubes and use a vented cap.
__________________
56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2000
Location: Fort Mill, SC
Posts: 71
|
The filler neck I am using is a marine filler neck, I dont think it is a self venting cap. Looking for other thoughts.
__________________
Kenny |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|