WTB 250 or 292 6cyl west texas area - The 1947 - Present Chevrolet & GMC Truck Message Board Network

***Josh*** · 09-04-2005, 11:41 PM

My panel truck lost a cylinder the other day, and I'm in need of a replacement 250 for it, I prefer something complete running shape carb to oil pan if possible, if not lemme knwo what ya got. Would also be interested in a 292 w/engine mounts.

fade94 · 09-04-2005, 11:47 PM

If there was a way to get it to you, I would give you the one I have out of a 67 GMC for all the help this board has provided me.

Chevy_Man · 09-05-2005, 12:07 AM

I have a complete that i pulled from my 68, but you sure do live a long ways off.

68 short step · 09-05-2005, 10:29 AM

i have two that are ready complete and running. one is in my 68 and is currently running and the other i just got done ( i mean JUST got done) doing a minor rebuild and it looks great. this one is complete too , but the carb is in the process of beeing rebuilt. i live in the greenville area. let me know. sorry i dont have a digital camara either.

***Josh*** · 09-05-2005, 07:16 PM

fade94 I'm very interested in that, how many miles on it? ran good? no oil use etc.?

Chevy_man, I may be intersted in that if these few closer ot me dont pan out.

68 short step, how much would you want for either one of them?

Josh

Chevy_Man · 09-05-2005, 07:38 PM

Just let me know,,, its not going anywhere...tranny goes with it also and its a three speed.

Eric

jack'd up · 09-05-2005, 09:36 PM

I have a 250 that was running when pulled but smoked when you first started it you can have for free .99 I live just east of the DFW metroplex. But work in Dallas.

68 short step · 09-06-2005, 08:17 AM

100$ for the one in the 68 or 350$ for the one that just got redone

fade94 · 09-06-2005, 09:36 AM

I didn't start it before pulling it. It came from a 67 GMC that someone was cutting the frame down to a short bed and lost interest. I have no history on it. I only got the truck for the cab. It's almost 400 miles from me to you...

Tx Firefighter · 09-06-2005, 11:08 PM

Josh, I have a 72 model 250. It was a smooth runner when Matt67350 pulled it out.

I'll PM the price to you.

09-04-2005, 11:41 PM	#1
*Josh* He's got mean nasty FANGS! Join Date: Dec 1999 Location: Rockwell, NC Posts: 6,509	WTB 250 or 292 6cyl west texas area My panel truck lost a cylinder the other day, and I'm in need of a replacement 250 for it, I prefer something complete running shape carb to oil pan if possible, if not lemme knwo what ya got. Would also be interested in a 292 w/engine mounts. __________________ 2004 K2500 Burb 1999 C3500 1985 Cutlass Supreme 1969 C-10 1967 C-10 Panel josh@67-72chevytrucks.com

09-04-2005, 11:47 PM	#2
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	If there was a way to get it to you, I would give you the one I have out of a 67 GMC for all the help this board has provided me. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

09-05-2005, 12:07 AM	#3
Chevy_Man Tightwad Join Date: Jun 2005 Location: Louisiana Posts: 408	I have a complete that i pulled from my 68, but you sure do live a long ways off. Attached Images Last edited by Chevy_Man; 09-05-2005 at 12:07 AM.

09-05-2005, 10:29 AM	#4
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	i have two i have two that are ready complete and running. one is in my 68 and is currently running and the other i just got done ( i mean JUST got done) doing a minor rebuild and it looks great. this one is complete too , but the carb is in the process of beeing rebuilt. i live in the greenville area. let me know. sorry i dont have a digital camara either.

09-05-2005, 07:16 PM	#5
*Josh* He's got mean nasty FANGS! Join Date: Dec 1999 Location: Rockwell, NC Posts: 6,509	fade94 I'm very interested in that, how many miles on it? ran good? no oil use etc.? Chevy_man, I may be intersted in that if these few closer ot me dont pan out. 68 short step, how much would you want for either one of them? Josh __________________ 2004 K2500 Burb 1999 C3500 1985 Cutlass Supreme 1969 C-10 1967 C-10 Panel josh@67-72chevytrucks.com

09-05-2005, 07:38 PM	#6
Chevy_Man Tightwad Join Date: Jun 2005 Location: Louisiana Posts: 408	Just let me know,,, its not going anywhere...tranny goes with it also and its a three speed. Eric

09-05-2005, 09:36 PM	#7
jack'd up Registered User Join Date: May 2003 Location: DFW Posts: 127	I have a 250 that was running when pulled but smoked when you first started it you can have for free .99 I live just east of the DFW metroplex. But work in Dallas.

09-06-2005, 08:17 AM	#8
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	100$ for the one in the 68 or 350$ for the one that just got redone

09-06-2005, 09:36 AM	#9
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	I didn't start it before pulling it. It came from a 67 GMC that someone was cutting the frame down to a short bed and lost interest. I have no history on it. I only got the truck for the cab. It's almost 400 miles from me to you... __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

09-06-2005, 11:08 PM	#10
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Josh, I have a 72 model 250. It was a smooth runner when Matt67350 pulled it out. I'll PM the price to you. __________________ I'm on the Instagram- @Gearhead_Kevin

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.