V8 power steering for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JQ-72** · 08-11-2005, 07:15 PM

Power steering set up complete with pump, brackets for small V8, hoses, and steering sector. $200 shipped.
JQ

2500HD · 08-13-2005, 09:50 AM

Do you know the condition. Leaks, slop in the box anything I should know? Is the steering sector the same thing as a rag joint?

**JQ-72** · 08-13-2005, 11:50 AM

It was removed from a non-running truck, but I have no reason to suspect that it is bad. The sector feels tight and the pump still had oil in it. I have pulled several of these off parked trucks and they work fine. The rag joint is actually a coupling between the column and the gearbox. This gearbox (sector) still has the rag joint on it.
JQ

**JQ-72** · 08-16-2005, 04:04 PM

OK, how about $175 shipped???

Joshua

meathead95 · 08-16-2005, 05:05 PM

whats the truck in your avatar? did you get another 4x4?

Green Machine · 08-16-2005, 09:29 PM

What year is that from ? Is it 2WD half ton ?

**JQ-72** · 08-16-2005, 10:45 PM

Meathead : That's the same 4X4 I had when you came down - still haven't got the lift kit on it!! I figured it was time to change my avitar since I sold the other truck over a year ago!!!

Green Machine : It came off a 69 or 70 model 2wd with 350 V8.

Joshua

Green Machine · 08-16-2005, 11:00 PM

Would you have a crank pulley for that ?

meathead95 · 08-17-2005, 08:01 AM

what did you have it painted? i thought it was multiple colors? maybe im thinking of someone elses truck

2500HD · 09-03-2005, 11:11 PM

JQ-72: Do you still have the power steering set up? Can you tell me what crank pulley was used with this set up? I also would like to know what groove was used on the crank pulley.

mrdurden · 09-05-2005, 02:19 AM

Is the power steering set still for sale?

longhorn71 · 09-05-2005, 02:58 AM

Quote:

Originally Posted by rick980

Is not the sector shaft the one that goes to the pitman arm? The other is called I don't know so I could be wrong ...but maybe worm gear shaft, or something like that. The reason I say this i cuz I am looking for a good sector shaft cuz if they leak the tend to pit and rust just about where they go into the box. I am having a hard time finding one.

Are you meaning the pitman arm?(it is the part the connects the steering box to the tie rods)If so they well interchange from 68-84 and are avaliable at Napa dealers. they quoteed me 120 bucks for it here.I swaped a power steering box from a 84 1/2 ton into my 72 1-ton (bolt on swap)but the newer trucks have a long water pump so the pump is different.I swaped the long water pump and moved the alternator to the passanger side because i could not fid the right pump.the pitman arm bolted right into the 72 drag link (i think that is what it is called)the part numbers are different for the pitman arms from 68-72 and 73-87 trucks but the newer one is the same.Or you could try GMC Pauls i am sure he has new ones too.(the manual steering ones are different tho)

**JQ-72** · 09-05-2005, 03:03 PM

Still for sale. $150 shipped (continental US). If it doesn't sell at this price, I'll just keep it!!

I do not have a crank pulley for it.

2500HD · 09-05-2005, 05:33 PM

I'll take it for $150.00 shipped. Let me know how you want to be paid. I can send you a money order or whatever you like.

**JQ-72** · 09-05-2005, 06:31 PM

2500HD - PM sent!
Joshua

2500HD · 09-06-2005, 09:39 PM

paypal and return PM sent. I hope you can find the mounting hardware. If not I'm sure I can figure it out.

2500HD · 09-07-2005, 10:45 PM

JQ-72 did you get the paypal?

08-11-2005, 07:15 PM	#1
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	V8 power steering for sale Power steering set up complete with pump, brackets for small V8, hoses, and steering sector. $200 shipped. JQ Attached Images

08-16-2005, 05:05 PM	#5
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	whats the truck in your avatar? did you get another 4x4? __________________ 72 2wd blazer 72 swb 4x4

08-16-2005, 09:29 PM	#6
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	What year is that from ? Is it 2WD half ton ? __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

08-16-2005, 11:00 PM	#8
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Would you have a crank pulley for that ? __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

08-17-2005, 08:01 AM	#9
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	what did you have it painted? i thought it was multiple colors? maybe im thinking of someone elses truck __________________ 72 2wd blazer 72 swb 4x4

08-13-2005, 09:50 AM	#2
2500HD Registered User Join Date: Aug 2005 Location: DFW Posts: 268	Do you know the condition. Leaks, slop in the box anything I should know? Is the steering sector the same thing as a rag joint?

08-13-2005, 11:50 AM	#3
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	It was removed from a non-running truck, but I have no reason to suspect that it is bad. The sector feels tight and the pump still had oil in it. I have pulled several of these off parked trucks and they work fine. The rag joint is actually a coupling between the column and the gearbox. This gearbox (sector) still has the rag joint on it. JQ

08-16-2005, 04:04 PM	#4
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	OK, how about $175 shipped??? Joshua

08-16-2005, 10:45 PM	#7
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	Meathead : That's the same 4X4 I had when you came down - still haven't got the lift kit on it!! I figured it was time to change my avitar since I sold the other truck over a year ago!!! Green Machine : It came off a 69 or 70 model 2wd with 350 V8. Joshua

09-03-2005, 11:11 PM	#10
2500HD Registered User Join Date: Aug 2005 Location: DFW Posts: 268	JQ-72: Do you still have the power steering set up? Can you tell me what crank pulley was used with this set up? I also would like to know what groove was used on the crank pulley.

09-05-2005, 02:19 AM	#11
mrdurden Registered User Join Date: Sep 2004 Location: Rio Rancho, NM Posts: 92	Is the power steering set still for sale? __________________ '67 2wd LWB Fleetside '71 4wd LWB Fleetside

09-05-2005, 03:03 PM	#13
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	Still for sale. $150 shipped (continental US). If it doesn't sell at this price, I'll just keep it!! I do not have a crank pulley for it.

09-05-2005, 05:33 PM	#14
2500HD Registered User Join Date: Aug 2005 Location: DFW Posts: 268	I'll take it for $150.00 shipped. Let me know how you want to be paid. I can send you a money order or whatever you like.

09-05-2005, 06:31 PM	#15
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	2500HD - PM sent! Joshua

09-06-2005, 09:39 PM	#16
2500HD Registered User Join Date: Aug 2005 Location: DFW Posts: 268	paypal and return PM sent. I hope you can find the mounting hardware. If not I'm sure I can figure it out.



Register or Log In To remove these advertisements.

09-07-2005, 10:45 PM	#17
2500HD Registered User Join Date: Aug 2005 Location: DFW Posts: 268	JQ-72 did you get the paypal?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.