67 68 E-brake handle. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fade94 · 09-12-2005, 02:03 PM

Came off of a 67 GMC. I sanded the "sliding" area down and greased it. Seems to be working now. $25 shipped to lower 48

fade94 · 09-12-2005, 02:21 PM

Hopefully somone else can answer. I don't have that cab anymore and I don't know if it will bolt up to the 69-72 cab. If I remember right, it either bolted to the bottom of the dash, or to a bracket under/behind the dash. Sorry I couldn't give more info. I'm sure a mounting plate could be made to mount it wherever you need to put it.

fade94 · 09-12-2005, 02:35 PM

That may be where it goes. My 70 was missing that plate when I got it. I have since put one on off of a 69. This is the plate that has the rubber bumpers for the pedals to rest against. That sounds like it's where this would mount.

fade94 · 09-12-2005, 09:25 PM

bump

fade94 · 09-13-2005, 08:11 AM

Make me an offer.

09-12-2005, 02:03 PM	#1
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	67 68 E-brake handle. Came off of a 67 GMC. I sanded the "sliding" area down and greased it. Seems to be working now. $25 shipped to lower 48 Attached Images __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

09-12-2005, 02:21 PM	#2
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Hopefully somone else can answer. I don't have that cab anymore and I don't know if it will bolt up to the 69-72 cab. If I remember right, it either bolted to the bottom of the dash, or to a bracket under/behind the dash. Sorry I couldn't give more info. I'm sure a mounting plate could be made to mount it wherever you need to put it. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

09-12-2005, 02:35 PM	#3
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	That may be where it goes. My 70 was missing that plate when I got it. I have since put one on off of a 69. This is the plate that has the rubber bumpers for the pedals to rest against. That sounds like it's where this would mount. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

09-12-2005, 09:25 PM	#4
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	bump __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

09-13-2005, 08:11 AM	#5
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Make me an offer. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.