What is this part of steering column called - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Yukon Jack** · 09-15-2005, 12:29 PM

I am putting this van tilt in my truck and I don't know what the piece that goes in the circled area is called. Anyone know the correct name of that piece that fits in this hole?

1969 BRUCE · 09-15-2005, 12:30 PM

Quote:

Originally Posted by Yukon Jack

I am putting this van tilt in my truck and I don't know what the piece that goes in the circled area is called. Anyone know the correct name of that piece that fits in this hole?

It's for the horn pin.

cdowns · 09-15-2005, 12:43 PM

i think the technical term is "thingy" theres supposed to be a pin thats spring loaded for the horn contact

**uncle** · 09-15-2005, 01:48 PM

That whole piece is called a cancelling cam.

**1970 CST Short Wide** · 09-15-2005, 02:07 PM

How's the truck coming along. Havent seen up-date pics in a long time

Did you get your engine problem fixed?

Your going to love that Big Block Power

**Yukon Jack** · 09-15-2005, 02:23 PM

Intake hopefully goes on tonight and with luck she will be fired up tomorrow - I'll be keeping my fingers crossed!

Fred T · 09-15-2005, 05:22 PM

This might help.

barn9 · 09-15-2005, 06:09 PM

Don't feel bad Yukon, the engineers at Grant Steering Wheels are still trying to figure that one out also, LOL!!!

LUV2XCLR8 · 09-15-2005, 06:13 PM

Quote:

Originally Posted by barn9

Don't feel bad Yukon, the engineers at Grant Steering Wheels are still trying to figure that one out also, LOL!!!

acloco · 09-15-2005, 06:50 PM

Quote:

Originally Posted by cdowns

i think the technical term is "thingy" theres supposed to be a pin thats spring loaded for the horn contact

Second this. And if you don't have one.....yer horn don't worky very well!

Bob Moore · 09-16-2005, 05:26 PM

If i'm not mistaken that is not the correct cancel cam for a tilt column. A truck and/or van cancel cam is not dished on top like that one. The correct one needs to be deeper to retain the spring on top of the shaft.

GMCjunkie · 09-16-2005, 09:01 PM

Yep!..

..... its a "thingy"

XXL · 09-16-2005, 09:14 PM

Quote:

Originally Posted by cdowns

i think the technical term is "thingy"

cdowns and XXL... separated at birth?

09-15-2005, 12:29 PM	#1
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	What is this part of steering column called I am putting this van tilt in my truck and I don't know what the piece that goes in the circled area is called. Anyone know the correct name of that piece that fits in this hole? Attached Images __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

09-15-2005, 12:43 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	i think the technical term is "thingy" theres supposed to be a pin thats spring loaded for the horn contact __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

09-15-2005, 01:48 PM	#4
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Name That whole piece is called a cancelling cam.

09-15-2005, 02:07 PM	#5
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,185	How's the truck coming along. Havent seen up-date pics in a long time Did you get your engine problem fixed? Your going to love that Big Block Power __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

09-15-2005, 02:23 PM	#6
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Intake hopefully goes on tonight and with luck she will be fired up tomorrow - I'll be keeping my fingers crossed! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

09-15-2005, 05:22 PM	#7
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	This might help. Attached Images __________________ Fred There is no such thing as too much cam...just not enough engine.

09-15-2005, 06:09 PM	#8
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	Don't feel bad Yukon, the engineers at Grant Steering Wheels are still trying to figure that one out also, LOL!!! __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

09-16-2005, 05:26 PM	#11
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	If i'm not mistaken that is not the correct cancel cam for a tilt column. A truck and/or van cancel cam is not dished on top like that one. The correct one needs to be deeper to retain the spring on top of the shaft. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

09-16-2005, 09:01 PM	#12
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Yep!.. ..... its a "thingy" __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.