Fl.side bed floor & wheel wells for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Botietruck · 09-18-2005, 09:21 PM

Parting out a "72 Chevy with 8' bed. The floor is near perfect with no dents. PO had plywood & carpet with a camper shell and I doubt anything has been hauled on the painted surface. The wheelwells are the same. The only problem is the rust at the rear corners of the bed floor and the front corners on the wheelwells. The left wheelwell is worse than the right, but not so bad that a piece could not be welded in. It's a shame about the rust, this floor has been well protected from dents/dings. The bottom side looks good, the supports are in good shape, will get some good pics of the bottom side tomorrow. $50.00 for the bottom and $30.00 plus shipping for both wheelwells, Local pickup on the bottom. Located in Chesapeake, VA

RainFade · 09-19-2005, 09:55 AM

Anyone from VA headed near Central Ohio with some cargo space in the NEAR future by chance ?

woodchip · 09-19-2005, 03:36 PM

I am interested in the bed floor& wheel wells pm sent.

Jakes-66-K10 · 09-19-2005, 04:06 PM

Sometimes it sucks not having more board members near you. If I was closer, I'd jump all over that. Exactly the bed pieces my truck needs to have replaced. *sigh*

09-18-2005, 09:21 PM	#1
Botietruck '71 chevy s.bed/s.side Join Date: Mar 2005 Location: Chesapeake, VA Posts: 1,571	Fl.side bed floor & wheel wells for sale Parting out a "72 Chevy with 8' bed. The floor is near perfect with no dents. PO had plywood & carpet with a camper shell and I doubt anything has been hauled on the painted surface. The wheelwells are the same. The only problem is the rust at the rear corners of the bed floor and the front corners on the wheelwells. The left wheelwell is worse than the right, but not so bad that a piece could not be welded in. It's a shame about the rust, this floor has been well protected from dents/dings. The bottom side looks good, the supports are in good shape, will get some good pics of the bottom side tomorrow. $50.00 for the bottom and $30.00 plus shipping for both wheelwells, Local pickup on the bottom. Located in Chesapeake, VA __________________ STILL PLAYS WITH CARS...AND TRUCKS!! Parents! Be good to your kids...they get to choose your nursing home! 250 I-6 with a 3 speed Saginaw and Borg Warner Overdrive...She's got overdrive!

09-19-2005, 09:55 AM	#2
RainFade Registered User Join Date: Nov 2004 Location: Central Ohio Posts: 215	Anyone from VA headed near Central Ohio with some cargo space in the NEAR future by chance ? __________________ 71 K20 350/350/205, dealer air, 4" lift, Flowtech,Edel 1406 on 2101, procomp HEI,4.10's, 33x12.50x16.5 BFG MT's on slots. 4 wheel disc brakes. My lame K20 page My lame Eaton disc brake page

09-19-2005, 03:36 PM	#3
woodchip Registered User Join Date: Feb 2005 Location: Lexington N.C. Posts: 160	I am interested in the bed floor& wheel wells pm sent. __________________ 98 Chevy Z71 1500 extended cab 99 Dodge carvan es 68 Chevy C10 LWB 50TH 396 eng 400 Trans 62 Wheel Horse tractor in good shape

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-19-2005, 04:06 PM	#4
Jakes-66-K10 Registered User Join Date: Aug 2004 Location: Idaho Posts: 640	Sometimes it sucks not having more board members near you. If I was closer, I'd jump all over that. Exactly the bed pieces my truck needs to have replaced. sigh



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.