Alright blazer Gods......... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HAVA79 · 09-28-2005, 03:45 PM

I just picked up a set of 97 yukon cloth buckets and console

-anybody have any experience putting these in a blazer. I've seen it done just never got close enough to see what mods need done....thanks jesse

Jonboy · 09-28-2005, 05:08 PM

Yep. I just drilled a couple extra holes, and used grade 8 mounting hardware. Find some thick fender washers to brace up teh floor around your new holes as well. I put 98 extended cab seats in my 77, and I have a 60/40 bench for the 78.

HAVA79 · 09-28-2005, 05:55 PM

Jonboy, does your extended cab passenger seat slide towards the dash with the lever on the seat back? That is really what I was looking for, but got a good deal on these with the console and my drivers seat is power. Also did you use the frames and tracks from the newer seats? thanks jesse

**Captkaos** · 09-28-2005, 06:26 PM

N2TRUX made new mounts for his so he could use the existing mounting points for the new seat. BTW, the extended cabs made before '99 I believe (those without 4th door) will slide forward. That is what Ken (N2TRUX) used.

It was simular to what I did on mine to put the '90 seats in my '78. Links are basically in order of what I did... I made a template for it now so I can cut them out.

http://www.captkaoscustoms.com/Jimmy/seatbracket1.jpg
http://www.captkaoscustoms.com/Jimmy/seatbracket2.jpg
http://www.captkaoscustoms.com/Jimmy/seatbracket3.jpg
http://www.captkaoscustoms.com/Jimmy/seatbracket4.jpg
http://www.captkaoscustoms.com/Jimmy/passtemplate.jpg
http://www.captkaoscustoms.com/Jimmy/seatbracket5.jpg
http://www.captkaoscustoms.com/Jimmy/seatbracket6.jpg
http://www.captkaoscustoms.com/Jimmy/jimmybrkt.jpg

Jonboy · 09-28-2005, 07:02 PM

The drivers side in mine is power also. I don't remember if the passengers side flips forward or not. I chucked the rear seat in my 77 as it stuck way up above the top of the quarters. I used the newer seat tracks. I got mine cheap too, so I used what was there. I was kind of undecided between the split bench and the buckets, so I have both.

**N2TRUX** · 09-29-2005, 11:00 PM

Quote:

Originally Posted by Captkaos

N2TRUX made new mounts for his so he could use the existing mounting points for the new seat. BTW, the extended cabs made before '99 I believe (those without 4th door) will slide forward. That is what Ken (N2TRUX) used.]

That's partially correct Chris. The seats (and brackets) I have are actually 95 GM truck only. The 94's had 88-94 style seats and brackets. The seats changed along with the dash in 95 and they went to a "flip and fold" bracket on the passenger side. In 96 the extra cabs went to the third door so the seat brackets were fixed, and power was available.....

HAVA79 · 09-30-2005, 10:49 AM

Those look sweet!!! I cant wait to get mine in. looks like you just used the stock brackets from the newer seats.?.

**Captkaos** · 09-30-2005, 01:40 PM

Quote:

Originally Posted by N2TRUX

That's partially correct Chris. The seats (and brackets) I have are actually 95 GM truck only.

Hey it has been a LOOOONNNGGGG time since you put those in there. Can't I get honorary mention or something? I was close.

**N2TRUX** · 09-30-2005, 06:55 PM

You did good. Heck I was surprised I even remebered all that. Besides you did a much better job of making the brackets...

**Captkaos** · 10-03-2005, 11:58 AM

Quote:

Originally Posted by N2TRUX

You did good. Heck I was surprised I even remebered all that. Besides you did a much better job of making the brackets...

Why thank you!

BTW, tried to call you the other night and couldn't get you. Just wanted to chat a while. Nothing important. Just making sure you aren't ignoring me.

**N2TRUX** · 10-04-2005, 09:08 AM

Quote:

Originally Posted by Captkaos

Why thank you!

BTW, tried to call you the other night and couldn't get you. Just wanted to chat a while. Nothing important. Just making sure you aren't ignoring me.

Who are you? Sorry buddy, I totally forgot. I got the message when I was on the phone, and never got back with you. I'll call tonight....

09-28-2005, 03:45 PM	#1
HAVA79 Master Blaster Join Date: Aug 2005 Location: Lake Havasu City AZ Posts: 122	Alright blazer Gods......... I just picked up a set of 97 yukon cloth buckets and console -anybody have any experience putting these in a blazer. I've seen it done just never got close enough to see what mods need done....thanks jesse

09-28-2005, 05:08 PM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Yep. I just drilled a couple extra holes, and used grade 8 mounting hardware. Find some thick fender washers to brace up teh floor around your new holes as well. I put 98 extended cab seats in my 77, and I have a 60/40 bench for the 78. __________________ 1974 Jimmy- 5.3/4L80e/NP241

09-28-2005, 06:26 PM	#4
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	N2TRUX made new mounts for his so he could use the existing mounting points for the new seat. BTW, the extended cabs made before '99 I believe (those without 4th door) will slide forward. That is what Ken (N2TRUX) used. It was simular to what I did on mine to put the '90 seats in my '78. Links are basically in order of what I did... I made a template for it now so I can cut them out. http://www.captkaoscustoms.com/Jimmy/seatbracket1.jpg http://www.captkaoscustoms.com/Jimmy/seatbracket2.jpg http://www.captkaoscustoms.com/Jimmy/seatbracket3.jpg http://www.captkaoscustoms.com/Jimmy/seatbracket4.jpg http://www.captkaoscustoms.com/Jimmy/passtemplate.jpg http://www.captkaoscustoms.com/Jimmy/seatbracket5.jpg http://www.captkaoscustoms.com/Jimmy/seatbracket6.jpg http://www.captkaoscustoms.com/Jimmy/jimmybrkt.jpg __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com Last edited by Captkaos; 09-28-2005 at 06:27 PM.

09-28-2005, 07:02 PM	#5
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	The drivers side in mine is power also. I don't remember if the passengers side flips forward or not. I chucked the rear seat in my 77 as it stuck way up above the top of the quarters. I used the newer seat tracks. I got mine cheap too, so I used what was there. I was kind of undecided between the split bench and the buckets, so I have both. __________________ 1974 Jimmy- 5.3/4L80e/NP241

09-30-2005, 06:55 PM	#9
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	You did good. Heck I was surprised I even remebered all that. Besides you did a much better job of making the brackets... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

09-28-2005, 05:55 PM	#3
HAVA79 Master Blaster Join Date: Aug 2005 Location: Lake Havasu City AZ Posts: 122	Jonboy, does your extended cab passenger seat slide towards the dash with the lever on the seat back? That is really what I was looking for, but got a good deal on these with the console and my drivers seat is power. Also did you use the frames and tracks from the newer seats? thanks jesse

09-30-2005, 10:49 AM	#7
HAVA79 Master Blaster Join Date: Aug 2005 Location: Lake Havasu City AZ Posts: 122	Those look sweet!!! I cant wait to get mine in. looks like you just used the stock brackets from the newer seats.?.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.