|
10-24-2005, 06:17 PM
|
#1 |
|
Senior Member
Join Date: Mar 2003
Location: St robert Mo
Posts: 2,001
|
fast idle adjust
I need to lower the rpms on my choke this is done by the fast idle screw yes?
I think it is on the passenger side of carb(holly 3310) How do I do it turn in what direction and small amounts or large amounts? Thanks for any help
__________________
1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO |
|
|
|
10-24-2005, 09:00 PM
|
#2 |
|
Registered User
Join Date: Mar 2005
Location: 10-Uh-See
Posts: 5,609
|
Re: fast idle adjust
It's pretty tricky. You can use a small flat blade screwdriver. You'll have to look at the screw from the front of the carb between the choke and main body and stick the screwdriver in from behind the choke. I can't remember which way to turn it. Just adjust it while it's cold and the choke is on.
That's the only thing I don't like about Holleys. Could they have made them any harder to get to? 
__________________
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
