![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Feb 2003
Location: Holland Pa.
Posts: 76
|
home brewed ProStreet?
any one have pic's of home brewed ProStreet set-up's?
I am prostreeting my 68/70 C10 short step and I bought the S&W backhalf frame rails but they seem a tad thin walled for my taste. So I really studied the factory set -up and figured why not just use this same set-up but just narrowed to about 20-23" wide fabricating new lower arms and frame rails out of say 3/16 wall rectangular tubing. I have the tools to do such a job but was wondering if anyone has already done the engineering on this type of suspension? Any input would be appreciated.
__________________
1970 C10 Stepside (soon to be a 68 w/PS/PB/S&W back-half narrowed F**D 9inch w/Discs) 66 427/435 corvette motor (hopefully 871 Blower) 66 M21 4 speed (swapped in a built TH400) 31/16.5/15 Mickeys (soon to be 29.5X18.5X15 MT) 1972 C10 Stepside Pro-Street 1988 bed 3" Top Chop Custom Red Pearl paint w/overlapping Ghost Flames P/S P/W P/B P/DL P/door open Everything Shaved Frenched antenna 461CI BBC BDS Blower 1100 Dynoed HP TH400 Super Heavy Duty Full Back-Half Narrowed 12 Bolt 4:10 |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2003
Location: Glendale Arizona
Posts: 747
|
Re: home brewed ProStreet?
I cant be of any help but do you have any pictures of your truck now?
__________________
"A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Dec 2001
Location: Redding,CA...USA
Posts: 4,736
|
Re: home brewed ProStreet?
I'd be interested in the S&W frame rails
__________________
It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,891
|
Re: home brewed ProStreet?
trailing arms are the only way to go! You can put a huge tire under these trucks without messing with the frame just some tubs in the bed!
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|