Putter Progress - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Putter · 11-01-2005, 02:08 PM

Seems like this is taking forever, but here is the latest progress on the old blue cab.
It is in Orange sealer right now. Might get around to painting the thing in the next 10-15 years.

Putter · 11-01-2005, 02:10 PM

Also got the seats mounted.
NOTE the adjustable height seatbelts!!!

Also got the glass installed, then had to remove it and re-install it because the installer didn't bother CENTERING it in the opening....causing the rubber to buckle.

Putter · 11-01-2005, 02:13 PM

Also, while I had a few minutes to spare, here is a glimpse at the delay wiper kit. Almost ready!!

**Palf70Step** · 11-01-2005, 02:17 PM

So when do we have the cab swap party Putter?

Putter · 11-01-2005, 02:34 PM

I never thought of that. I plan on saving a few backs and just using the front-end loader of the tractor. Might need someone to guide it onto the mounts, though!!!

yank · 11-01-2005, 02:43 PM

Putter where did you get them there seats. I like them.

tomatocity · 11-01-2005, 02:50 PM

Looks good Putter.
* What sealer are you using and does it come in colors or did you mix it?
* What are you asking for the wiper delay setup? Are those GM relays?

72 longhorn BB · 11-01-2005, 02:55 PM

I recognize those seats - they are middle (suburban) or rear (tahoe) seats out of a 04 - 99 suburban or tahoe.

How do they fit? Are they comfortable as the fronts?

They look awesome!

The adjustable belts look fine too!

Where are they from?

Details man!, .....we need details

67ChevyRedneck · 11-01-2005, 03:06 PM

Putter, you should add to your avatar: Inovator, not imitator!

tomatocity · 11-01-2005, 03:06 PM

They are not 3rd row seat since 3rd row seats are nice but not as nice as Putter's. Guessing 2nd (middle) row seats.

Putter · 11-01-2005, 03:17 PM

Okay....
Seat questions:
These are from a '99 Suburban.
Have them in local junkyard. Tan, Grey, etc... Leather, cloth, etc... (less than $200 a set)

Seatbelt stuff:
Belts are from a '97 extended cab Chevy 1500....NO THIRD DOOR.
Adjusters are from same truck...but to have them surface-mounted, it had to be a WORK TRUCK (W/T). No fancy interior trim.

Sealer:
I got it at a local auto paint/body supply store. It is a neutral color that can be tinted any color. I am going to go F-350 Orange, so I wanted some orange sealer. I don't have the brand-name handy.
I asked for tinted epoxy primer, but he could only do the regular colors like red-oxide, grey, tan, and grey-green. To get orange, I had to go with sealer.

Wiper kits:
Those are not GM relays. Just normal Bosch-type.
That kit right there would run you an even $100. Plus $5 for shipping, but will also include color instructions, power tap connector, zip ties, etc...and naturally some tech support to make it a complete kit.

chickenwing · 11-01-2005, 04:08 PM

Looks great Eric!

Anyone that's interested, the wiper switch works great! I got in on the pre-production run.

shifty · 11-01-2005, 04:09 PM

Are those heated/power seats? Those are the actual driver/passenger seats, right?

Putter · 11-01-2005, 04:54 PM

Shifty,
Nope...these are from the second row. No power....no forward/backward motion at all actually. They will fold down and flat....which is great for hauling TVs, monitors, etc....

I have it slammed against the rear wall anyhow, so I didn't need any adjustment.

Chickenwing....did you notice the mounting holes in those relays??? Good for mounting to the firewall or zip-tying them to the wiring harnesses!!!!!

**Yukon Jack** · 11-01-2005, 05:51 PM

It's looking great. Really cool to see the adjustable seatbelt slider being used.

1969 C/K CST · 11-01-2005, 05:55 PM

How many times have you sat in it and done those silly childish motor noises already? Nice work.

Luvlegs · 11-01-2005, 06:10 PM

Those noises are childish???? I thought they were a good personality trait! Ya gotta have a dream or else you won't know when you get there!

LUV2XCLR8 · 11-01-2005, 06:14 PM

Quote:

Originally Posted by Yukon Jack

It's looking great. Really cool to see the adjustable seatbelt slider being used.

Agreed, looks real good Eric

Boydness · 11-01-2005, 06:37 PM

When can I bring my truck by to have it Putter-ized like that?
Is Thursday good for you?

krue · 11-01-2005, 07:10 PM

Yeah, I'm taking my truck up there to get all the stuff GM forgot to put on it installed.

Looks good eric.

Fred T · 11-01-2005, 08:09 PM

Truck's looking good, Putter. But y'all need to get back to work on them wiper switches.

**Classic Heartbeat** · 11-01-2005, 09:01 PM

Truck is looking great putter!! WES

**Bowtie468** · 11-01-2005, 09:40 PM

Quote:

Originally Posted by 1969 C/K CST

How many times have you sat in it and done those silly childish motor noises already? Nice work.

Looking great, Eric !! Coming along nicely !!

BTW .. How the heck ya been, buddy ????????

Chris

GMan69 · 11-01-2005, 11:52 PM

These pics don't even come close to showing how good it looks in person. AND, he failed to point out that he's installed an A/C dash and a late model temp/ compass mirror. This is gonna be one fine ride.

72 longhorn BB · 11-02-2005, 07:41 AM

Really man, that is an awesome job. I can't wait to see it finished. Posts like this one give me motivation to get my own rig finished.

I am interested in your wiper switch setup though. Did you make it?

Are you only selling them or would you share the schematic?

-Chuck

11-01-2005, 02:08 PM	#1
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Putter Progress Seems like this is taking forever, but here is the latest progress on the old blue cab. It is in Orange sealer right now. Might get around to painting the thing in the next 10-15 years. Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

11-01-2005, 02:10 PM	#2
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Putter Progress Also got the seats mounted. NOTE the adjustable height seatbelts!!! Also got the glass installed, then had to remove it and re-install it because the installer didn't bother CENTERING it in the opening....causing the rubber to buckle. Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

11-01-2005, 02:13 PM	#3
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Putter Progress Also, while I had a few minutes to spare, here is a glimpse at the delay wiper kit. Almost ready!! Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

11-01-2005, 02:17 PM	#4
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Putter Progress So when do we have the cab swap party Putter? __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-01-2005, 02:34 PM	#5
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Putter Progress I never thought of that. I plan on saving a few backs and just using the front-end loader of the tractor. Might need someone to guide it onto the mounts, though!!! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

11-01-2005, 02:43 PM	#6
yank Registered User Join Date: Jan 2001 Location: Meridian, Ms. Posts: 244	Re: Putter Progress Putter where did you get them there seats. I like them. __________________ 70 C/10 SWB Go ahead chance it........Columbus did!!! Steve (Chitlin) Bacon My DIY Shop http://s24.photobucket.com/albums/c47/mpalmiter/shop/

11-01-2005, 02:50 PM	#7
tomatocity Registered User Join Date: Jun 2005 Location: Sacramento CA Posts: 1,255	Re: Putter Progress Looks good Putter. * What sealer are you using and does it come in colors or did you mix it? * What are you asking for the wiper delay setup? Are those GM relays? __________________ Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck.

11-01-2005, 02:55 PM	#8
72 longhorn BB Registered User Join Date: Jan 2000 Location: Michigan Posts: 312	Re: Putter Progress I recognize those seats - they are middle (suburban) or rear (tahoe) seats out of a 04 - 99 suburban or tahoe. How do they fit? Are they comfortable as the fronts? They look awesome! The adjustable belts look fine too! Where are they from? Details man!, .....we need details __________________ Chuck 1972 C-20 Longhorn 402 BB .030" over (409?), curved HEI, RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit 1999 K1500 Suburban (old style) 5.7L Vortec 4L60E "No matter where you go, ........ there you are"

11-01-2005, 03:06 PM	#9
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Putter Progress Putter, you should add to your avatar: Inovator, not imitator! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

11-01-2005, 03:06 PM	#10
tomatocity Registered User Join Date: Jun 2005 Location: Sacramento CA Posts: 1,255	Re: Putter Progress They are not 3rd row seat since 3rd row seats are nice but not as nice as Putter's. Guessing 2nd (middle) row seats. __________________ Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck.

11-01-2005, 03:17 PM	#11
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Putter Progress Okay.... Seat questions: These are from a '99 Suburban. Have them in local junkyard. Tan, Grey, etc... Leather, cloth, etc... (less than $200 a set) Seatbelt stuff: Belts are from a '97 extended cab Chevy 1500....NO THIRD DOOR. Adjusters are from same truck...but to have them surface-mounted, it had to be a WORK TRUCK (W/T). No fancy interior trim. Sealer: I got it at a local auto paint/body supply store. It is a neutral color that can be tinted any color. I am going to go F-350 Orange, so I wanted some orange sealer. I don't have the brand-name handy. I asked for tinted epoxy primer, but he could only do the regular colors like red-oxide, grey, tan, and grey-green. To get orange, I had to go with sealer. Wiper kits: Those are not GM relays. Just normal Bosch-type. That kit right there would run you an even $100. Plus $5 for shipping, but will also include color instructions, power tap connector, zip ties, etc...and naturally some tech support to make it a complete kit. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

11-01-2005, 04:08 PM	#12
chickenwing Lovin' Life in Miss.! Join Date: Mar 2004 Location: Puckett, Mississippi Posts: 1,937	Re: Putter Progress Looks great Eric! Anyone that's interested, the wiper switch works great! I got in on the pre-production run.

11-01-2005, 04:09 PM	#13
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Putter Progress Are those heated/power seats? Those are the actual driver/passenger seats, right? __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

11-01-2005, 04:54 PM	#14
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Putter Progress Shifty, Nope...these are from the second row. No power....no forward/backward motion at all actually. They will fold down and flat....which is great for hauling TVs, monitors, etc.... I have it slammed against the rear wall anyhow, so I didn't need any adjustment. Chickenwing....did you notice the mounting holes in those relays??? Good for mounting to the firewall or zip-tying them to the wiring harnesses!!!!! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

11-01-2005, 05:51 PM	#15
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Putter Progress It's looking great. Really cool to see the adjustable seatbelt slider being used. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14



Register or Log In To remove these advertisements.

11-01-2005, 05:55 PM	#16
1969 C/K CST A.K.A- Crummy Join Date: Jun 2005 Location: NC foothills Posts: 3,025	Re: Putter Progress How many times have you sat in it and done those silly childish motor noises already? Nice work. __________________ 2003 Silverado Z71 Are fishermen all liars?

11-01-2005, 06:10 PM	#17
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: Putter Progress Those noises are childish???? I thought they were a good personality trait! Ya gotta have a dream or else you won't know when you get there! __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

11-01-2005, 06:37 PM	#19
Boydness Projects follow me home... Join Date: Aug 2005 Location: St Marys, OH Posts: 88	Re: Putter Progress When can I bring my truck by to have it Putter-ized like that? Is Thursday good for you? __________________ '51 Willys Wagon (SBC 350) '56 Willys Wagon (SBC 350) '77 Chevy Corvette 350 '79 Chevy G30 (Coachmen) 350 '79 Chevy G30 (Transvan) 350

11-01-2005, 07:10 PM	#20
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Putter Progress Yeah, I'm taking my truck up there to get all the stuff GM forgot to put on it installed. Looks good eric. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-01-2005, 08:09 PM	#21
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Re: Putter Progress Truck's looking good, Putter. But y'all need to get back to work on them wiper switches. __________________ Fred There is no such thing as too much cam...just not enough engine.

11-01-2005, 09:01 PM	#22
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Putter Progress Truck is looking great putter!! WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

11-01-2005, 11:52 PM	#24
GMan69 Registered User Join Date: Mar 2001 Location: Hernando, MS USA Posts: 1,152	Re: Putter Progress These pics don't even come close to showing how good it looks in person. AND, he failed to point out that he's installed an A/C dash and a late model temp/ compass mirror. This is gonna be one fine ride. __________________ George Morgan Hernando, MS '69 C-10 swb fleetside '72 GMC swb Stepside

11-02-2005, 07:41 AM	#25
72 longhorn BB Registered User Join Date: Jan 2000 Location: Michigan Posts: 312	Re: Putter Progress Really man, that is an awesome job. I can't wait to see it finished. Posts like this one give me motivation to get my own rig finished. I am interested in your wiper switch setup though. Did you make it? Are you only selling them or would you share the schematic? -Chuck __________________ Chuck 1972 C-20 Longhorn 402 BB .030" over (409?), curved HEI, RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit 1999 K1500 Suburban (old style) 5.7L Vortec 4L60E "No matter where you go, ........ there you are"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.