Blazer gas tank dimensions? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Keith in NY · 10-31-2005, 04:41 PM

I have a 64 pickup that I am moving the gas tank from behind the seats to under the bed. I think a early Blazer tank will fit, but would like some better dimensions to see if I need to cut the frame or crossmembers. Everyone I have called with the tanks has no idea if the dimensions are the tank, or the tank including the flanges

Could you help a guy out and take a tape measure to your tank? Wondering what the size of a 20-21 gallon tank is. With or without the flanges.

Thanks in advance,

Keith

LUV2XCLR8 · 10-31-2005, 07:07 PM

2 THE BOARD FROM WEST 10-UH-C

This board member will make them to fit from scratch, just give
him your dimensions and walla, not sure about the prices for it.

Fuel Cell Guy - http://67-72chevytrucks.com/vboard/member.php?u=8871

VinceY · 10-31-2005, 11:49 PM

The LMC catalog says the blazer and burb tank is 21 gallons and is 13"H x19"W x 30"L. $200.

My 71 is lowered so this tank would not fit. I ended up getting a stainless one custom made for $300 CDN. If I remember right it is sloped from 7"H at the back to 9" H by the diff x 27"W x 29"L. There was a rod shop in the area selling a steel tank with the exact measurements for lowered trucks for almost $600.

Good luck.

krue · 10-31-2005, 11:53 PM

Welcome to the board from South Mississippi. PM Palf70step, I believe he just did this swap and may know the numbers you need.

Keith in NY · 11-01-2005, 09:06 AM

The LMC catalog says the blazer and burb tank is 21 gallons and is 13"H x19"W x 30"L. $200

Yup, that is the one I'm looking at. I have 27.5" between framerails, but if the 30" includes the flanges, I can bend them down and have them inside the channel of the rail. If not, I gotta get busy with a sawzall.
I have considered custom tanks, but the Blazer tank looks a lot more budget friendly.

Thanks for the warm welcome.
Keith

VinceY · 11-02-2005, 11:06 PM

Quote:

Originally Posted by Keith in NY

The LMC catalog says the blazer and burb tank is 21 gallons and is 13"H x19"W x 30"L. $200

Yup, that is the one I'm looking at. I have 27.5" between framerails, but if the 30" includes the flanges, I can bend them down and have them inside the channel of the rail. If not, I gotta get busy with a sawzall.
I have considered custom tanks, but the Blazer tank looks a lot more budget friendly.

Thanks for the warm welcome.
Keith

I measured my tank, which I am assuming is a stock tank and here is what I saw.
The length of the tank is approx. 26" with an approx. 2" flange on each side to make 30" total.
Not sure if bending them will affect the integrity of the tank or not.

Keith in NY · 11-03-2005, 09:27 AM

Thanks!!! That flange and tank dimension is just what I needed. Looks like I will be able to put one under the bed of my truck pretty easy. I found a shop that has the tank, straps and 30 ohm sending unit I need for a real good price.

Thanks for taking the time to check on that for me, these forums are a great source of info.

Keith

10-31-2005, 04:41 PM	#1
Keith in NY Registered User Join Date: Oct 2005 Location: ny Posts: 3	Blazer gas tank dimensions? I have a 64 pickup that I am moving the gas tank from behind the seats to under the bed. I think a early Blazer tank will fit, but would like some better dimensions to see if I need to cut the frame or crossmembers. Everyone I have called with the tanks has no idea if the dimensions are the tank, or the tank including the flanges Could you help a guy out and take a tape measure to your tank? Wondering what the size of a 20-21 gallon tank is. With or without the flanges. Thanks in advance, Keith

10-31-2005, 07:07 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Blazer gas tank dimensions? 2 THE BOARD FROM WEST 10-UH-C This board member will make them to fit from scratch, just give him your dimensions and walla, not sure about the prices for it. Fuel Cell Guy - http://67-72chevytrucks.com/vboard/member.php?u=8871 __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 10-31-2005 at 07:09 PM.

10-31-2005, 11:49 PM	#3
VinceY Just need a couple more parts. Join Date: Jan 2005 Location: Calgary, Alberta, Canada Posts: 470	Re: Blazer gas tank dimensions? The LMC catalog says the blazer and burb tank is 21 gallons and is 13"H x19"W x 30"L. $200. My 71 is lowered so this tank would not fit. I ended up getting a stainless one custom made for $300 CDN. If I remember right it is sloped from 7"H at the back to 9" H by the diff x 27"W x 29"L. There was a rod shop in the area selling a steel tank with the exact measurements for lowered trucks for almost $600. Good luck. __________________ --------------------------------------------------- 1947 Studebaker M5 project to match the camping trailer. 1950 Chev 4x4 Pickup 1958 Shasta Airflyte Travel trailer (fresh restoration) 1971 C/10 Pickup(Frame off Restoration) 1972 K5 Blazer CST (Daily Driver & My Company Truck) 1976 Honda CB750 Bobber 1988 Jaguar XJ12 Last edited by VinceY; 10-31-2005 at 11:49 PM.

10-31-2005, 11:53 PM	#4
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Blazer gas tank dimensions? Welcome to the board from South Mississippi. PM Palf70step, I believe he just did this swap and may know the numbers you need. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-01-2005, 09:06 AM	#5
Keith in NY Registered User Join Date: Oct 2005 Location: ny Posts: 3	Re: Blazer gas tank dimensions? The LMC catalog says the blazer and burb tank is 21 gallons and is 13"H x19"W x 30"L. $200 Yup, that is the one I'm looking at. I have 27.5" between framerails, but if the 30" includes the flanges, I can bend them down and have them inside the channel of the rail. If not, I gotta get busy with a sawzall. I have considered custom tanks, but the Blazer tank looks a lot more budget friendly. Thanks for the warm welcome. Keith Last edited by Keith in NY; 11-01-2005 at 09:34 AM.

11-03-2005, 09:27 AM	#7
Keith in NY Registered User Join Date: Oct 2005 Location: ny Posts: 3	Re: Blazer gas tank dimensions? Thanks!!! That flange and tank dimension is just what I needed. Looks like I will be able to put one under the bed of my truck pretty easy. I found a shop that has the tank, straps and 30 ohm sending unit I need for a real good price. Thanks for taking the time to check on that for me, these forums are a great source of info. Keith

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.