![]() |
![]() |
#1 |
Senior Member
![]() Join Date: Aug 2001
Location: Kansas City, Mo
Posts: 1,029
|
How to ID a Stepside
Tell me guys and gals, how can you ID a Stepside shortbed is there something in the VIN number. I know of a 67 stepside with factory a/c power steering, power brakes. I have never heard of a stepside with all these stock options.
Thanks for all your help.
__________________
DREW67 |
![]() |
![]() |
![]() |
#2 |
What's that funky smell?
Join Date: Mar 2005
Location: Austin, TX
Posts: 610
|
Re: How to ID a Stepside
For 1/2 tons, the model numbers for stepsides are CS10704 for a SWB 6cyl, CE10704 for a SWB 8 cyl, CS10904 for a LWB 6cly and CE10904 for a LWB 8 cylinder engine. These might show up on the glovebox sticker if it is still there.
Here is a site that has VIN decoders for our trucks. Hope it helps a little.
__________________
Mike S 68 C10 Long Step (Pretending to be a Long Fleetside) Grandpa's Farm Truck 3 on the tree, 307, No power brakes or steering Factory Options - HD rear spring and Ammeter/Oil Gauges My truck blog My Car Domain page |
![]() |
![]() |
![]() |
#3 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: How to ID a Stepside
Step side trucks could be had with just about any option that a fleet side could have, there were even step side CST and Cyeyenne trucks built.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Aug 2001
Location: Kansas City, Mo
Posts: 1,029
|
Re: How to ID a Stepside
The VI # is CE147B126520 i'M JUST TRYING TO MAKE SURE THIS TRUCK HAS ALWAYS AN ORGINAL STEPSIDE TRUCK NOT A PIECE TOGETHER.
__________________
DREW67 |
![]() |
![]() |
![]() |
#5 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: How to ID a Stepside
You'll need the model number, not the VIN. The model number is in the glove box on the SPID label (option sheet)
If the SPID label is gone, then you MIGHT get lucky by pulling the seat and looking for the build sheet stuffed into the springs. Once in a great whiel the build sheet...or broadcast sheet, will show up under the carpet or betewwn the rear cab wall and fuel tank...but those ones are far and few between. With out either of these pieces of documentation, you'll NEVER know the originality of that bed. All your VIN tells us is; C - 2 wheel drive E - A V-8 of what ever size 1 - 1/2 ton 4 - Pickup with Cab and Bed (not specifying which bed) 7 - 1967 B - Baltimore assembly plant 126520 The 26520th truck to roll off the Baltimore line for the 67 model year. http://www.67-72chevytrucks.com/Chevyear.html Last edited by Longhorn Man; 11-29-2005 at 11:25 PM. |
![]() |
![]() |
![]() |
#6 |
Join Date: Dec 1999
Location: Eastern - Manitoba Canada, Winnipeg
Posts: 4,369
|
Re: How to ID a Stepside
Longhorn Man has you in the right direction.
|
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Aug 2001
Location: Kansas City, Mo
Posts: 1,029
|
Re: How to ID a Stepside
Thanks Guys.
I'll ask the owner for this info.
__________________
DREW67 |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2000
Location: Michigan
Posts: 312
|
Re: How to ID a Stepside
I'd love to see a picture of a stepside cheyenne
__________________
Chuck 1972 C-20 Longhorn 402 BB .030" over (409?), curved HEI, RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit 1999 K1500 Suburban (old style) 5.7L Vortec 4L60E "No matter where you go, ........ there you are" |
![]() |
![]() |
![]() |
#9 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: How to ID a Stepside
We have a member who owns a green one...don't know if he's active or not, this was 1 1/2 to 2 years ago he came around.
On the outside it looks like any other stepside, except it has a red cheyene badge on the fender and a chrome bumper. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|