Drag race Rear end..any intrest? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigjimzlll · 11-21-2005, 05:12 PM

Im getting ready to swap to a shortend 9". I am looking to selling my new 12 bolt.
It has welded tubes, Mark Williams new 35 spline axels,spool and C clip eliminators. New drum brakes. 4.56 gears. One of those girdled aluminum covers. 4340 yoke. Long 1/2" studs 6 on 5.5 pattern. All parts have less than 10 passes on them. The rear was setup by a professional.

It will be available the 1st week in December. Im thinking $700.00 is more than fair.
Let me know If anyone wants it. A very small deposit will hold it until you want it.

<upadated>
Newish 4"lowering springs included and shocks
I also have 2 sets of centerline hellcats with one set havin MT et drags 10.5x28 and the other set 13.5x28 mt et streets. both have less than 10 passes. Will make a great deal to the buyer of the rear.

djracer · 11-30-2005, 03:29 PM

bigjim
do you have you 9 inch stuff yet?

bigjimzlll · 12-01-2005, 01:09 AM

this weekend if the weather is any good I will pickit up. 1000 clams is a lot b4 christmas..but priorities you know..lol. It has 4.86 gears ..huge axels and a spool. disc brakes. Its 56" wide. I have some 32"x15x15 Mickey thompson et drags to fit on it. I am going to slam it pretty far so it should be pretty cool.

djracer · 12-01-2005, 01:22 AM

Kool I have some real nice 9inch stuff for sale if you see anyone looking! Mines not that cheap!

11-21-2005, 05:12 PM	#1
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Drag race Rear end..any intrest?<updated> Im getting ready to swap to a shortend 9". I am looking to selling my new 12 bolt. It has welded tubes, Mark Williams new 35 spline axels,spool and C clip eliminators. New drum brakes. 4.56 gears. One of those girdled aluminum covers. 4340 yoke. Long 1/2" studs 6 on 5.5 pattern. All parts have less than 10 passes on them. The rear was setup by a professional. It will be available the 1st week in December. Im thinking $700.00 is more than fair. Let me know If anyone wants it. A very small deposit will hold it until you want it. <upadated> Newish 4"lowering springs included and shocks I also have 2 sets of centerline hellcats with one set havin MT et drags 10.5x28 and the other set 13.5x28 mt et streets. both have less than 10 passes. Will make a great deal to the buyer of the rear. __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA Last edited by bigjimzlll; 11-22-2005 at 10:46 AM.*

11-30-2005, 03:29 PM	#2
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Drag race Rear end..any intrest? bigjim do you have you 9 inch stuff yet? __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-01-2005, 01:09 AM	#3
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Re: Drag race Rear end..any intrest? this weekend if the weather is any good I will pickit up. 1000 clams is a lot b4 christmas..but priorities you know..lol. It has 4.86 gears ..huge axels and a spool. disc brakes. Its 56" wide. I have some 32"x15x15 Mickey thompson et drags to fit on it. I am going to slam it pretty far so it should be pretty cool. __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

12-01-2005, 01:22 AM	#4
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Drag race Rear end..any intrest? Kool I have some real nice 9inch stuff for sale if you see anyone looking! Mines not that cheap! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.