front end rebuild?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

squeekyM · 12-20-2005, 03:27 PM

Where can I find an entire front end kit (ball joints, tie rods, bushings) for a '72 C20. Thanks for the help, take care.

neonlarry · 12-20-2005, 03:53 PM

Early Classic in Fresno.

Tx Firefighter · 12-20-2005, 03:55 PM

All the parts are readily available at any decent local parts store if you want to shop close to home.

krue · 12-20-2005, 05:01 PM

Most of the stores stock Moog parts (at least the ones around here do).

67ChevyRedneck · 12-20-2005, 05:05 PM

Quote:

Originally Posted by krue

Most of the stores stock Moog parts (at least the ones around here do).

I used MOOG from either advance or autozone (can't remember which carries them??) and I bought new rotors and calipers and I think it was all around $250??? The only thing advance or autozone didnt carry was the rubber brake lines, and Napa wanted $55 each, so I ordered them from LMC for like $25???

12-20-2005, 03:27 PM	#1
squeekyM Registered User Join Date: Jun 2005 Location: California Posts: 51	front end rebuild?? Where can I find an entire front end kit (ball joints, tie rods, bushings) for a '72 C20. Thanks for the help, take care.

12-20-2005, 03:53 PM	#2
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	Re: front end rebuild?? Early Classic in Fresno. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

12-20-2005, 03:55 PM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: front end rebuild?? All the parts are readily available at any decent local parts store if you want to shop close to home. __________________ I'm on the Instagram- @Gearhead_Kevin

12-20-2005, 05:01 PM	#4
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: front end rebuild?? Most of the stores stock Moog parts (at least the ones around here do). __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.