![]() |
![]() |
#1 |
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
Haulin A
My dad blew out the rear end in his 80 3/4 ton while on vacation yesterday ( for the second time I might add. I dont like 14 bolt rear ends! ) so off I am to save the day in the 68. Starting at 12 noon I had to go from Vashon Island to the junkyard in Kitsap county , find a rear end, get it loaded up and make the 500 plus mile round trip from Port orchard washington to Lake Chelan and back before bedtime so I could go to work in the morning. Anyone who knows the topography and the traffic of Western Washington will be impressed. Made the return route in under 3 1/2 hours. I will state for the record though. 100 mph in a 68 is a bit on the uncomfortable side.
__________________
No truck :-( |
![]() |
![]() |
![]() |
#2 |
Saving 1 truck at a time!
Join Date: Aug 2001
Location: Kent, WA
Posts: 6,465
|
Especially with a 14-bolt rolling around in back...LMAO! Where do you work on Vashon...K2? I thought they moved. You are a good son...that is why you move more than one state away from the parents...LOL!
__________________
'68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) |
![]() |
![]() |
![]() |
#3 |
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
K2 is gone but seattles best coffee is still there for the time being.
Sliding? How about slamming against the front of the box and punching two holes in the bed wall ;-(
__________________
No truck :-( |
![]() |
![]() |
![]() |
#4 |
Saving 1 truck at a time!
Join Date: Aug 2001
Location: Kent, WA
Posts: 6,465
|
OUCH! I did that once with some steel pipe in the back of my 1971 El Camino...never hauled a load that was not tied down again. It's a real pain to fix those...as much as I love welding up trim mount holes...LOL!
I guess you are still doing your body work so anything goesp until that final paint job!
__________________
'68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) |
![]() |
![]() |
![]() |
#5 |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
![]()
Yes, you're a good son!
Ahhhhhh, Lake Chelan. Every year as a kid my family went to a little village up in the mountains. It's called Holden Village. It's a half hour bus trip straight up from Lucerne, at the far end of the lake. I hated it back then but really wish I could get back there, now that I'm an adult and need the relaxing surroundings!
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
![]() |
![]() |
![]() |
#6 |
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
Luckily the holes are in the Inside of the bed at the front. An area which can wait. I thought I had it fairly well secured. I was wrong. Beautifull area Chelan. If only there were decent jobs there I'd be on it.
__________________
No truck :-( |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|